/*-
 * Copyright (c) 2016 Jared McNeill <jmcneill@invisible.ca>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * $FreeBSD$
 */

#include "sun8i-h3-orangepi-plus.dts"
#include "h3.dtsi"

/ {
	model = "Xunlong Orange Pi Plus 2E";
	compatible = "xunlong,orangepi-plus-2e", "allwinner,sun8i-h3";

	reg_gmac_3v3: gmac-3v3 {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&emac_phy_reset_pin>;
		regulator-name = "gmac-3v3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		startup-delay-us = <100000>;
		enable-active-high;
		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
	};
};

&pio {
	emac_phy_reset_pin: emac_phy_reset_pin@0 {
		allwinner,pins = "PD6";
		allwinner,function = "gpio_out";
		allwinner,drive = <10>;
	};

	codec_pa_pin: codec_pa_pin@0 {
		allwinner,pins = "PA16";
		allwinner,function = "gpio_out";
		allwinner,drive = <10>;
	};
};

&emac {
	pinctrl-names = "default";
	pinctrl-0 = <&emac_pins_rgmii_a>;
	phy-supply = <&reg_gmac_3v3>;
	phy-mode = "rgmii";
	phy = <&phy1>;

	allwinner,leds-active-low;
	status = "okay";

	phy1: ethernet-phy@1 {
		reg = <1>;
	};
};

&ehci2 {
	status = "okay";
};

&i2c0 {
	status = "okay";
};

&r_i2c {
	status = "okay";

	vdd_cpu: regulator@65 {
		compatible = "silergy,sy8106a";
		reg = <0x65>;

		regulator-name = "vdd-cpu";
		regulator-min-microvolt = <1000000>;
		regulator-max-microvolt = <1400000>;
		regulator-ramp-delay = <200>;
		regulator-boot-on;
		regulator-always-on;
	};
};

/* &codec { */
/* 	pinctrl-names = "default"; */
/* 	pinctrl-0 = <&codec_pa_pin>; */
/* 	allwinner,pa-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /\* PA16 *\/ */
/* 	status = "okay"; */
/* }; */

&cpu0 {
	cpu-supply = <&vdd_cpu>;
	operating-points = <
		/* kHz	  uV */
		1296000	1340000
		1200000	1320000
		1008000	1200000
		816000	1100000
		648000	1040000
		>;
};