/* Copyright (c) 2008-2011 Freescale Semiconductor, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * Neither the name of Freescale Semiconductor nor the * names of its contributors may be used to endorse or promote products * derived from this software without specific prior written permission. * * * ALTERNATIVELY, this software may be distributed under the terms of the * GNU General Public License ("GPL") as published by the Free Software * Foundation, either version 2 of that License or (at your option) any * later version. * * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /**************************************************************************//** @File fm_port_ext.h @Description FM-Port Application Programming Interface. *//***************************************************************************/ #ifndef __FM_PORT_EXT #define __FM_PORT_EXT #include "error_ext.h" #include "std_ext.h" #include "fm_pcd_ext.h" #include "fm_ext.h" #include "net_ext.h" /**************************************************************************//** @Group FM_grp Frame Manager API @Description FM API functions, definitions and enums @{ *//***************************************************************************/ /**************************************************************************//** @Group FM_PORT_grp FM Port @Description FM Port API The FM uses a general module called "port" to represent a Tx port (MAC), an Rx port (MAC), offline parsing flow or host command flow. There may be up to 17 (may change) ports in an FM - 5 Tx ports (4 for the 1G MACs, 1 for the 10G MAC), 5 Rx Ports, and 7 Host command/Offline parsing ports. The SW driver manages these ports as sub-modules of the FM, i.e. after an FM is initialized, its ports may be initialized and operated upon. The port is initialized aware of its type, but other functions on a port may be indifferent to its type. When necessary, the driver verifies coherency and returns error if applicable. On initialization, user specifies the port type and it's index (relative to the port's type). Host command and Offline parsing ports share the same id range, I.e user may not initialized host command port 0 and offline parsing port 0. @{ *//***************************************************************************/ /**************************************************************************//** @Description An enum for defining port PCD modes. This enum defines the superset of PCD engines support - i.e. not all engines have to be used, but all have to be enabled. The real flow of a specific frame depends on the PCD configuration and the frame headers and payload. *//***************************************************************************/ typedef enum e_FmPortPcdSupport { e_FM_PORT_PCD_SUPPORT_NONE = 0, /**< BMI to BMI, PCD is not used */ e_FM_PORT_PCD_SUPPORT_PRS_ONLY, /**< Use only Parser */ e_FM_PORT_PCD_SUPPORT_PLCR_ONLY, /**< Use only Policer */ e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR, /**< Use Parser and Policer */ e_FM_PORT_PCD_SUPPORT_PRS_AND_KG, /**< Use Parser and Keygen */ e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC, /**< Use Parser, Keygen and Coarse Classification */ e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR, /**< Use all PCD engines */ e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR /**< Use Parser, Keygen and Policer */ #ifdef FM_CAPWAP_SUPPORT , e_FM_PORT_PCD_SUPPORT_CC_ONLY, /**< Use only Coarse Classification */ e_FM_PORT_PCD_SUPPORT_CC_AND_KG, /**< Use Coarse Classification,and Keygen */ e_FM_PORT_PCD_SUPPORT_CC_AND_KG_AND_PLCR /**< Use Coarse Classification, Keygen and Policer */ #endif /* FM_CAPWAP_SUPPORT */ } e_FmPortPcdSupport; /**************************************************************************//** @Description Port interrupts *//***************************************************************************/ typedef enum e_FmPortExceptions { e_FM_PORT_EXCEPTION_IM_BUSY /**< Independent-Mode Rx-BUSY */ } e_FmPortExceptions; /**************************************************************************//** @Collection General FM Port defines *//***************************************************************************/ #define FM_PORT_PRS_RESULT_NUM_OF_WORDS 8 /**< Number of 4 bytes words in parser result */ /* @} */ /**************************************************************************//** @Collection FM Frame error *//***************************************************************************/ typedef uint32_t fmPortFrameErrSelect_t; /**< typedef for defining Frame Descriptor errors */ #define FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT 0x04000000 /**< Offline parsing only! Unsupported Format */ #define FM_PORT_FRM_ERR_LENGTH 0x02000000 /**< Offline parsing only! Length Error */ #define FM_PORT_FRM_ERR_DMA 0x01000000 /**< DMA Data error */ #ifdef FM_CAPWAP_SUPPORT #define FM_PORT_FRM_ERR_NON_FM 0x00400000 /**< non Frame-Manager error; probably come from SEC that was chained to FM */ #endif /* FM_CAPWAP_SUPPORT */ #define FM_PORT_FRM_ERR_PHYSICAL 0x00080000 /**< Rx FIFO overflow, FCS error, code error, running disparity error (SGMII and TBI modes), FIFO parity error. PHY Sequence error, PHY error control character detected. */ #define FM_PORT_FRM_ERR_SIZE 0x00040000 /**< Frame too long OR Frame size exceeds max_length_frame */ #define FM_PORT_FRM_ERR_CLS_DISCARD 0x00020000 /**< classification discard */ #define FM_PORT_FRM_ERR_EXTRACTION 0x00008000 /**< Extract Out of Frame */ #define FM_PORT_FRM_ERR_NO_SCHEME 0x00004000 /**< No Scheme Selected */ #define FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW 0x00002000 /**< Keysize Overflow */ #define FM_PORT_FRM_ERR_COLOR_YELLOW 0x00000400 /**< Frame color is yellow */ #define FM_PORT_FRM_ERR_COLOR_RED 0x00000800 /**< Frame color is red */ #define FM_PORT_FRM_ERR_ILL_PLCR 0x00000200 /**< Illegal Policer Profile selected */ #define FM_PORT_FRM_ERR_PLCR_FRAME_LEN 0x00000100 /**< Policer frame length error */ #define FM_PORT_FRM_ERR_PRS_TIMEOUT 0x00000080 /**< Parser Time out Exceed */ #define FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT 0x00000040 /**< Invalid Soft Parser instruction */ #define FM_PORT_FRM_ERR_PRS_HDR_ERR 0x00000020 /**< Header error was identified during parsing */ #define FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED 0x00000008 /**< Frame parsed beyind 256 first bytes */ #define FM_PORT_FRM_ERR_PROCESS_TIMEOUT 0x00000001 /**< FPM Frame Processing Timeout Exceeded */ /* @} */ /**************************************************************************//** @Group FM_PORT_init_grp FM Port Initialization Unit @Description FM Port Initialization Unit @{ *//***************************************************************************/ /**************************************************************************//** @Description Exceptions user callback routine, will be called upon an exception passing the exception identification. @Param[in] h_App - User's application descriptor. @Param[in] exception - The exception. *//***************************************************************************/ typedef void (t_FmPortExceptionCallback) (t_Handle h_App, e_FmPortExceptions exception); /**************************************************************************//** @Description User callback function called by driver with received data. User provides this function. Driver invokes it. @Param[in] h_App Application's handle originally specified to the API Config function @Param[in] p_Data A pointer to data received @Param[in] length length of received data @Param[in] status receive status and errors @Param[in] position position of buffer in frame @Param[in] h_BufContext A handle of the user acossiated with this buffer @Retval e_RX_STORE_RESPONSE_CONTINUE - order the driver to continue Rx operation for all ready data. @Retval e_RX_STORE_RESPONSE_PAUSE - order the driver to stop Rx operation. *//***************************************************************************/ typedef e_RxStoreResponse (t_FmPortImRxStoreCallback) (t_Handle h_App, uint8_t *p_Data, uint16_t length, uint16_t status, uint8_t position, t_Handle h_BufContext); /**************************************************************************//** @Description User callback function called by driver when transmit completed. User provides this function. Driver invokes it. @Param[in] h_App Application's handle originally specified to the API Config function @Param[in] p_Data A pointer to data received @Param[in] status transmit status and errors @Param[in] lastBuffer is last buffer in frame @Param[in] h_BufContext A handle of the user acossiated with this buffer *//***************************************************************************/ typedef void (t_FmPortImTxConfCallback) (t_Handle h_App, uint8_t *p_Data, uint16_t status, t_Handle h_BufContext); /**************************************************************************//** @Description A structure of information about each of the external buffer pools used by the port, *//***************************************************************************/ typedef struct t_FmPortExtPoolParams { uint8_t id; /**< External buffer pool id */ uint16_t size; /**< External buffer pool buffer size */ } t_FmPortExtPoolParams; /**************************************************************************//** @Description A structure for informing the driver about the external buffer pools allocated in the BM and used by this port. *//***************************************************************************/ typedef struct t_FmPortExtPools { uint8_t numOfPoolsUsed; /**< Number of pools use by this port */ t_FmPortExtPoolParams extBufPool[FM_PORT_MAX_NUM_OF_EXT_POOLS]; /**< Parameters for each port */ } t_FmPortExtPools; /**************************************************************************//** @Description structure for additional Rx port parameters *//***************************************************************************/ typedef struct t_FmPortRxParams { uint32_t errFqid; /**< Error Queue Id. */ uint32_t dfltFqid; /**< Default Queue Id. */ uint16_t liodnOffset; /**< Port's LIODN offset. */ t_FmPortExtPools extBufPools; /**< Which external buffer pools are used (up to FM_PORT_MAX_NUM_OF_EXT_POOLS), and their sizes. */ } t_FmPortRxParams; /**************************************************************************//** @Description structure for additional non-Rx port parameters *//***************************************************************************/ typedef struct t_FmPortNonRxParams { uint32_t errFqid; /**< Error Queue Id. */ uint32_t dfltFqid; /**< For Tx and HC - Default Confirmation queue, 0 means no Tx confirmation for processed frames. For OP - default Rx queue. */ uint32_t qmChannel; /**< QM-channel dedicated to this port; will be used by the FM for dequeue. */ #ifdef FM_OP_PARTITION_ERRATA_FMANx8 uint16_t opLiodnOffset; /**< For Offline Parsing ports only. Port's LIODN offset. */ #endif /* FM_OP_PARTITION_ERRATA_FMANx8 */ } t_FmPortNonRxParams; /**************************************************************************//** @Description structure for additional Rx port parameters *//***************************************************************************/ typedef struct t_FmPortImRxTxParams { t_Handle h_FmMuram; /**< A handle of the FM-MURAM partition */ uint16_t liodnOffset; /**< For Rx ports only. Port's LIODN Offset. */ uint8_t dataMemId; /**< Memory partition ID for data buffers */ uint32_t dataMemAttributes; /**< Memory attributes for data buffers */ t_BufferPoolInfo rxPoolParams; /**< For Rx ports only. */ t_FmPortImRxStoreCallback *f_RxStore; /**< For Rx ports only. */ t_FmPortImTxConfCallback *f_TxConf; /**< For Tx ports only. */ } t_FmPortImRxTxParams; /**************************************************************************//** @Description Union for additional parameters depending on port type *//***************************************************************************/ typedef union u_FmPortSpecificParams { t_FmPortImRxTxParams imRxTxParams; /**< Rx/Tx Independent-Mode port parameter structure */ t_FmPortRxParams rxParams; /**< Rx port parameters structure */ t_FmPortNonRxParams nonRxParams; /**< Non-Rx port parameters structure */ } u_FmPortSpecificParams; /**************************************************************************//** @Description structure representing FM initialization parameters *//***************************************************************************/ typedef struct t_FmPortParams { uintptr_t baseAddr; /**< Virtual Address of memory mapped FM Port registers.*/ t_Handle h_Fm; /**< A handle to the FM object this port related to */ e_FmPortType portType; /**< Port type */ uint8_t portId; /**< Port Id - relative to type */ bool independentModeEnable; /**< This port is Independent-Mode - Used for Rx/Tx ports only! */ uint16_t liodnBase; /**< Irrelevant for P4080 rev 1. LIODN base for this port, to be used together with LIODN offset. */ u_FmPortSpecificParams specificParams; /**< Additional parameters depending on port type. */ t_FmPortExceptionCallback *f_Exception; /**< Callback routine to be called of PCD exception */ t_Handle h_App; /**< A handle to an application layer object; This handle will be passed by the driver upon calling the above callbacks */ } t_FmPortParams; /**************************************************************************//** @Function FM_PORT_Config @Description Creates descriptor for the FM PORT module. The routine returns a handle (descriptor) to the FM PORT object. This descriptor must be passed as first parameter to all other FM PORT function calls. No actual initialization or configuration of FM hardware is done by this routine. @Param[in] p_FmPortParams - Pointer to data structure of parameters @Retval Handle to FM object, or NULL for Failure. *//***************************************************************************/ t_Handle FM_PORT_Config(t_FmPortParams *p_FmPortParams); /**************************************************************************//** @Function FM_PORT_Init @Description Initializes the FM PORT module @Param[in] h_FmPort - FM PORT module descriptor @Return E_OK on success; Error code otherwise. *//***************************************************************************/ t_Error FM_PORT_Init(t_Handle h_FmPort); /**************************************************************************//** @Function FM_PORT_Free @Description Frees all resources that were assigned to FM PORT module. Calling this routine invalidates the descriptor. @Param[in] h_FmPort - FM PORT module descriptor @Return E_OK on success; Error code otherwise. *//***************************************************************************/ t_Error FM_PORT_Free(t_Handle h_FmPort); /**************************************************************************//** @Group FM_PORT_advanced_init_grp FM Port Advanced Configuration Unit @Description Configuration functions used to change default values. @{ *//***************************************************************************/ /**************************************************************************//** @Description enum for defining QM frame dequeue *//***************************************************************************/ typedef enum e_FmPortDeqType { e_FM_PORT_DEQ_TYPE1, /**< Dequeue from the SP channel - with priority precedence, and Intra-Class Scheduling respected. */ e_FM_PORT_DEQ_TYPE2, /**< Dequeue from the SP channel - with active FQ precedence, and Intra-Class Scheduling respected. */ e_FM_PORT_DEQ_TYPE3 /**< Dequeue from the SP channel - with active FQ precedence, and override Intra-Class Scheduling */ } e_FmPortDeqType; #ifdef FM_QMI_DEQ_OPTIONS_SUPPORT /**************************************************************************//** @Description enum for defining QM frame dequeue *//***************************************************************************/ typedef enum e_FmPortDeqPrefetchOption { e_FM_PORT_DEQ_NO_PREFETCH, /**< QMI preforms a dequeue action for a single frame only when a dedicated portID Tnum is waiting. */ e_FM_PORT_DEQ_PARTIAL_PREFETCH, /**< QMI preforms a dequeue action for 3 frames when one dedicated portId tnum is waiting. */ e_FM_PORT_DEQ_FULL_PREFETCH /**< QMI preforms a dequeue action for 3 frames when no dedicated portId tnums are waiting. */ } e_FmPortDeqPrefetchOption; #endif /* FM_QMI_DEQ_OPTIONS_SUPPORT */ /**************************************************************************//** @Description enum for defining port DMA swap mode *//***************************************************************************/ typedef enum e_FmPortDmaSwap { e_FM_PORT_DMA_NO_SWP, /**< No swap, transfer data as is.*/ e_FM_PORT_DMA_SWP_PPC_LE, /**< The transferred data should be swapped in PowerPc Little Endian mode. */ e_FM_PORT_DMA_SWP_BE /**< The transferred data should be swapped in Big Endian mode */ } e_FmPortDmaSwap; /**************************************************************************//** @Description enum for defining port DMA cache attributes *//***************************************************************************/ typedef enum e_FmPortDmaCache { e_FM_PORT_DMA_NO_STASH = 0, /**< Cacheable, no Allocate (No Stashing) */ e_FM_PORT_DMA_STASH = 1 /**< Cacheable and Allocate (Stashing on) */ } e_FmPortDmaCache; /**************************************************************************//** @Description enum for defining port default color *//***************************************************************************/ typedef enum e_FmPortColor { e_FM_PORT_COLOR_GREEN, /**< Default port color is green */ e_FM_PORT_COLOR_YELLOW, /**< Default port color is yellow */ e_FM_PORT_COLOR_RED, /**< Default port color is red */ e_FM_PORT_COLOR_OVERRIDE /**< Ignore color */ } e_FmPortColor; /**************************************************************************//** @Description struct for defining Dual Tx rate limiting scale *//***************************************************************************/ typedef enum e_FmPortDualRateLimiterScaleDown { e_FM_PORT_DUAL_RATE_LIMITER_NONE = 0, /**< Use only single rate limiter */ e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_2, /**< Divide high rate limiter by 2 */ e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_4, /**< Divide high rate limiter by 4 */ e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_8 /**< Divide high rate limiter by 8 */ } e_FmPortDualRateLimiterScaleDown; /**************************************************************************//** @Description struct for defining FM port resources *//***************************************************************************/ typedef struct t_FmPortRsrc { uint32_t num; /**< Committed required resource */ uint32_t extra; /**< Extra (not committed) required resource */ } t_FmPortRsrc; /**************************************************************************//** @Description struct for defining pool depletion criteria *//***************************************************************************/ typedef struct t_FmPortBufPoolDepletion { bool numberOfPoolsModeEnable; /**< select mode in which pause frames will be sent after a number of pools are depleted */ uint8_t numOfPools; /**< the minimum number of depleted pools that will invoke pause frames transmission. */ bool poolsToConsider[BM_MAX_NUM_OF_POOLS]; /**< For each pool, TRUE if it should be considered for depletion (Note - this pool must be used by this port!) */ bool singlePoolModeEnable; /**< select mode in which pause frames will be sent after a single of pools are depleted */ bool poolsToConsiderForSingleMode[BM_MAX_NUM_OF_POOLS]; /**< For each pool, TRUE if it should be considered for depletion (Note - this pool must be used by this port!) */ } t_FmPortBufPoolDepletion; /**************************************************************************//** @Description struct for defining observed pool depletion *//***************************************************************************/ typedef struct t_FmPortObservedBufPoolDepletion { t_FmPortBufPoolDepletion poolDepletionParams;/**< parameters to define pool depletion */ t_FmPortExtPools poolsParams; /**< Which external buffer pools are observed (up to FM_PORT_MAX_NUM_OF_OBSERVED_EXT_POOLS), and their sizes. */ } t_FmPortObservedBufPoolDepletion; /**************************************************************************//** @Description struct for defining Tx rate limiting *//***************************************************************************/ typedef struct t_FmPortRateLimit { uint16_t maxBurstSize; /**< in kBytes for Tx ports, in frames for offline parsing ports. (note that for early chips burst size is rounded up to a multiply of 1000 frames).*/ uint32_t rateLimit; /**< in Kb/sec for Tx ports, in frame/sec for offline parsing ports. Rate limit refers to data rate (rather than line rate). */ e_FmPortDualRateLimiterScaleDown rateLimitDivider; /**< For offline parsing ports only. Not-valid for some earlier chip revisions */ } t_FmPortRateLimit; /**************************************************************************//** @Description struct for defining define the parameters of the Rx port performance counters *//***************************************************************************/ typedef struct t_FmPortPerformanceCnt { uint8_t taskCompVal; /**< Task compare value */ uint8_t queueCompVal; /**< Rx queue/Tx confirm queue compare value (unused for H/O) */ uint8_t dmaCompVal; /**< Dma compare value */ uint32_t fifoCompVal; /**< Fifo compare value (in bytes) */ } t_FmPortPerformanceCnt; /**************************************************************************//** @Description struct for defining buffer content. *//***************************************************************************/ typedef struct t_FmPortBufferPrefixContent { uint16_t privDataSize; /**< Number of bytes to be left at the beginning of the external buffer */ bool passPrsResult; /**< TRUE to pass the parse result to/from the FM */ bool passTimeStamp; /**< TRUE to pass the timeStamp to/from the FM */ bool passHashResult; /**< TRUE to pass the KG hash result to/from the FM */ bool passAllOtherPCDInfo;/**< Add all other Internal-Context information: AD, hash-result, key, etc. */ uint16_t dataAlign; /**< 0 to use driver's default alignment, other value for selecting a data alignment (must be a power of 2) */ #ifdef DEBUG bool passDebugInfo; /**< Debug-information */ #endif /* DEBUG */ #ifdef FM_CAPWAP_SUPPORT uint8_t manipExtraSpace; /**< Maximum extra size needed (insertion-size minus removal-size) */ #endif /* FM_CAPWAP_SUPPORT */ } t_FmPortBufferPrefixContent; /**************************************************************************//** @Description struct for defining backup Bm Pools. *//***************************************************************************/ typedef struct t_FmPortBackupBmPools { uint8_t numOfBackupPools; /**< Number of BM backup pools - must be smaller than the total number of pools defined for the specified port.*/ uint8_t poolIds[FM_PORT_MAX_NUM_OF_EXT_POOLS]; /**< numOfBackupPools pool id's, specifying which pools should be used only as backup. Pool id's specified here must be a subset of the pools used by the specified port.*/ } t_FmPortBackupBmPools; /**************************************************************************//** @Function FM_PORT_ConfigDeqHighPriority @Description Calling this routine changes the dequeue priority in the internal driver data base from its default configuration [TRUE] May be used for Non-Rx ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] highPri TRUE to select high priority, FALSE for normal operation. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigDeqHighPriority(t_Handle h_FmPort, bool highPri); /**************************************************************************//** @Function FM_PORT_ConfigDeqType @Description Calling this routine changes the dequeue type parameter in the internal driver data base from its default configuration [e_FM_PORT_DEQ_TYPE1]. May be used for Non-Rx ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] deqType According to QM definition. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigDeqType(t_Handle h_FmPort, e_FmPortDeqType deqType); #ifdef FM_QMI_DEQ_OPTIONS_SUPPORT /**************************************************************************//** @Function FM_PORT_ConfigDeqPrefetchOption @Description Calling this routine changes the dequeue prefetch option parameter in the internal driver data base from its default configuration [e_FM_PORT_DEQ_FULL_PREFETCH] Note: Available for some chips only May be used for Non-Rx ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] deqPrefetchOption New option @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigDeqPrefetchOption(t_Handle h_FmPort, e_FmPortDeqPrefetchOption deqPrefetchOption); #endif /* FM_QMI_DEQ_OPTIONS_SUPPORT */ /**************************************************************************//** @Function FM_PORT_ConfigDeqByteCnt @Description Calling this routine changes the dequeue byte count parameter in the internal driver data base from its default configuration [2000]. May be used for Non-Rx ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] deqByteCnt New byte count @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigDeqByteCnt(t_Handle h_FmPort, uint16_t deqByteCnt); /**************************************************************************//** @Function FM_PORT_ConfigTxFifoMinFillLevel @Description Calling this routine changes the fifo minimum fill level parameter in the internal driver data base from its default configuration [0] May be used for Tx ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] minFillLevel New value @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigTxFifoMinFillLevel(t_Handle h_FmPort, uint32_t minFillLevel); /**************************************************************************//** @Function FM_PORT_ConfigTxFifoDeqPipelineDepth @Description Calling this routine changes the fifo dequeue pipeline depth parameter in the internal driver data base from its default configuration: 1G ports: [2], 10G port: [8] May be used for Tx ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] deqPipelineDepth New value @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigTxFifoDeqPipelineDepth(t_Handle h_FmPort, uint8_t deqPipelineDepth); /**************************************************************************//** @Function FM_PORT_ConfigTxFifoLowComfLevel @Description Calling this routine changes the fifo low comfort level parameter in internal driver data base from its default configuration [5] May be used for Tx ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] fifoLowComfLevel New value @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigTxFifoLowComfLevel(t_Handle h_FmPort, uint32_t fifoLowComfLevel); /**************************************************************************//** @Function FM_PORT_ConfigRxFifoThreshold @Description Calling this routine changes the threshold of the FIFO fill level parameter in the internal driver data base from its default configuration [BMI_MAX_FIFO_SIZE] If the total number of buffers which are currently in use and associated with the specific RX port exceed this threshold, the BMI will signal the MAC to send a pause frame over the link. May be used for Rx ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] fifoThreshold New value @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigRxFifoThreshold(t_Handle h_FmPort, uint32_t fifoThreshold); /**************************************************************************//** @Function FM_PORT_ConfigRxFifoPriElevationLevel @Description Calling this routine changes the priority elevation level parameter in the internal driver data base from its default configuration [BMI_MAX_FIFO_SIZE] If the total number of buffers which are currently in use and associated with the specific RX port exceed the amount specified in priElevationLevel, BMI will signal the main FM's DMA to elevate the FM priority on the system bus. May be used for Rx ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] priElevationLevel New value @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigRxFifoPriElevationLevel(t_Handle h_FmPort, uint32_t priElevationLevel); /**************************************************************************//** @Function FM_PORT_ConfigBufferPrefixContent @Description Defines the structure, size and content of the application buffer. The prefix will In Tx ports, if 'passPrsResult', the application should set a value to their offsets in the prefix of the FM will save the first 'privDataSize', than, depending on 'passPrsResult' and 'passTimeStamp', copy parse result and timeStamp, and the packet itself (in this order), to the application buffer, and to offset. Calling this routine changes the buffer margins definitions in the internal driver data base from its default configuration: Data size: [0] Pass Parser result: [FALSE]. Pass timestamp: [FALSE]. May be used for all ports @Param[in] h_FmPort A handle to a FM Port module. @Param[in,out] p_FmPortBufferPrefixContent A structure of parameters describing the structure of the buffer. Out parameter: Start margin - offset of data from start of external buffer. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigBufferPrefixContent(t_Handle h_FmPort, t_FmPortBufferPrefixContent *p_FmPortBufferPrefixContent); /**************************************************************************//** @Function FM_PORT_ConfigCheksumLastBytesIgnore @Description Calling this routine changes the number of checksum bytes to ignore parameter in the internal driver data base from its default configuration [0] May be used by Tx & Rx ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] cheksumLastBytesIgnore New value @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigCheksumLastBytesIgnore(t_Handle h_FmPort, uint8_t cheksumLastBytesIgnore); /**************************************************************************//** @Function FM_PORT_ConfigCutBytesFromEnd @Description Calling this routine changes the number of bytes to cut from a frame's end parameter in the internal driver data base from its default configuration [4] Note that if the result of (frame length before chop - cutBytesFromEnd) is less than 14 bytes, the chop operation is not executed. May be used for Rx ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] cutBytesFromEnd New value @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigCutBytesFromEnd(t_Handle h_FmPort, uint8_t cutBytesFromEnd); /**************************************************************************//** @Function FM_PORT_ConfigPoolDepletion @Description Calling this routine enables pause frame generation depending on the depletion status of BM pools. It also defines the conditions to activate this functionality. By default, this functionality is disabled. May be used for Rx ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_BufPoolDepletion A structure of pool depletion parameters @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigPoolDepletion(t_Handle h_FmPort, t_FmPortBufPoolDepletion *p_BufPoolDepletion); /**************************************************************************//** @Function FM_PORT_ConfigObservedPoolDepletion @Description Calling this routine enables a mechanism to stop port enqueue depending on the depletion status of selected BM pools. It also defines the conditions to activate this functionality. By default, this functionality is disabled. Note: Available for some chips only May be used for Offline Parsing ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_FmPortObservedBufPoolDepletion A structure of parameters for pool depletion. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigObservedPoolDepletion(t_Handle h_FmPort, t_FmPortObservedBufPoolDepletion *p_FmPortObservedBufPoolDepletion); /**************************************************************************//** @Function FM_PORT_ConfigExtBufPools @Description This routine should be called for offline parsing ports that internally use BM buffer pools. In such cases, e.g. for fragmentation and re-assembly, the FM needs new BM buffers. By calling this routine the user specifies the BM buffer pools that should be used. Note: Available for some chips only May be used for Offline Parsing ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_FmPortExtPools A structure of parameters for the external pools. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigExtBufPools(t_Handle h_FmPort, t_FmPortExtPools *p_FmPortExtPools); /**************************************************************************//** @Function FM_PORT_ConfigBackupPools @Description Calling this routine allows the configuration of some of the BM pools defined for this port as backup pools. A pool configured to be a backup pool will be used only if all other enabled non-backup pools are depleted. May be used for Rx ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_FmPortBackupBmPools An array of pool id's. All pools specified here will be defined as backup pools. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigBackupPools(t_Handle h_FmPort, t_FmPortBackupBmPools *p_FmPortBackupBmPools); /**************************************************************************//** @Function FM_PORT_ConfigFrmDiscardOverride @Description Calling this routine changes the error frames destination parameter in the internal driver data base from its default configuration: override = [FALSE] May be used for Rx and offline parsing ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] override TRUE to override dicarding of error frames and enqueueing them to error queue. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigFrmDiscardOverride(t_Handle h_FmPort, bool override); /**************************************************************************//** @Function FM_PORT_ConfigErrorsToDiscard @Description Calling this routine changes the behaviour on error parameter in the internal driver data base from its default configuration: [FM_PORT_FRM_ERR_CLS_DISCARD]. If a requested error was previously defined as "ErrorsToEnqueue" it's definition will change and the frame will be discarded. Errors that were not defined either as "ErrorsToEnqueue" nor as "ErrorsToDiscard", will be forwarded to CPU. May be used for Rx and offline parsing ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] errs A list of errors to discard @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigErrorsToDiscard(t_Handle h_FmPort, fmPortFrameErrSelect_t errs); /**************************************************************************//** @Function FM_PORT_ConfigDmaSwapData @Description Calling this routine changes the DMA swap data aparameter in the internal driver data base from its default configuration [e_FM_PORT_DMA_NO_SWP] May be used for all port types @Param[in] h_FmPort A handle to a FM Port module. @Param[in] swapData New selection @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigDmaSwapData(t_Handle h_FmPort, e_FmPortDmaSwap swapData); /**************************************************************************//** @Function FM_PORT_ConfigDmaIcCacheAttr @Description Calling this routine changes the internal context cache attribute parameter in the internal driver data base from its default configuration [e_FM_PORT_DMA_NO_STASH] May be used for all port types @Param[in] h_FmPort A handle to a FM Port module. @Param[in] intContextCacheAttr New selection @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigDmaIcCacheAttr(t_Handle h_FmPort, e_FmPortDmaCache intContextCacheAttr); /**************************************************************************//** @Function FM_PORT_ConfigDmaHdrAttr @Description Calling this routine changes the header cache attribute parameter in the internal driver data base from its default configuration [e_FM_PORT_DMA_NO_STASH] May be used for all port types @Param[in] h_FmPort A handle to a FM Port module. @Param[in] headerCacheAttr New selection @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigDmaHdrAttr(t_Handle h_FmPort, e_FmPortDmaCache headerCacheAttr); /**************************************************************************//** @Function FM_PORT_ConfigDmaScatterGatherAttr @Description Calling this routine changes the scatter gather cache attribute parameter in the internal driver data base from its default configuration [e_FM_PORT_DMA_NO_STASH] May be used for all port types @Param[in] h_FmPort A handle to a FM Port module. @Param[in] scatterGatherCacheAttr New selection @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigDmaScatterGatherAttr(t_Handle h_FmPort, e_FmPortDmaCache scatterGatherCacheAttr); /**************************************************************************//** @Function FM_PORT_ConfigDmaWriteOptimize @Description Calling this routine changes the write optimization parameter in the internal driver data base from its default configuration: optimize = [TRUE] May be used for non-Tx port types @Param[in] h_FmPort A handle to a FM Port module. @Param[in] optimize TRUE to enable optimization, FALSE for normal operation @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigDmaWriteOptimize(t_Handle h_FmPort, bool optimize); /**************************************************************************//** @Function FM_PORT_ConfigDfltColor @Description Calling this routine changes the internal default color parameter in the internal driver data base from its default configuration [e_FM_PORT_COLOR_GREEN] May be used for all port types @Param[in] h_FmPort A handle to a FM Port module. @Param[in] color New selection @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigDfltColor(t_Handle h_FmPort, e_FmPortColor color); /**************************************************************************//** @Function FM_PORT_ConfigSyncReq @Description Calling this routine changes the synchronization attribute parameter in the internal driver data base from its default configuration: syncReq = [TRUE] May be used for all port types @Param[in] h_FmPort A handle to a FM Port module. @Param[in] syncReq TRUE to request synchronization, FALSE otherwize. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigSyncReq(t_Handle h_FmPort, bool syncReq); /**************************************************************************//** @Function FM_PORT_ConfigForwardReuseIntContext @Description This routine is relevant for Rx ports that are routed to offline parsing. It changes the internal context reuse option in the internal driver data base from its default configuration: reuse = [FALSE] May be used for Rx ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] reuse TRUE to reuse internal context on frames forwarded to offline parsing. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigForwardReuseIntContext(t_Handle h_FmPort, bool reuse); /**************************************************************************//** @Function FM_PORT_ConfigDontReleaseTxBufToBM @Description This routine should be called if no Tx confirmation is done, and yet buffers should not be released to the BM. Normally, buffers are returned using the Tx confirmation process. When Tx confirmation is not used (defFqid=0), buffers are typically released to the BM. This routine may be called to avoid this behavior and not release the buffers. May be used for Tx ports only @Param[in] h_FmPort A handle to a FM Port module. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ConfigDontReleaseTxBufToBM(t_Handle h_FmPort); /**************************************************************************//** @Function FM_PORT_ConfigIMMaxRxBufLength @Description Changes the maximum receive buffer length from its default configuration: Closest rounded down power of 2 value of the data buffer size. The maximum receive buffer length directly affects the structure of received frames (single- or multi-buffered) and the performance of both the FM and the driver. The selection between single- or multi-buffered frames should be done according to the characteristics of the specific application. The recommended mode is to use a single data buffer per packet, as this mode provides the best performance. However, the user can select to use multiple data buffers per packet. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] newVal Maximum receive buffer length (in bytes). @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). This routine is to be used only if Independent-Mode is enabled. *//***************************************************************************/ t_Error FM_PORT_ConfigIMMaxRxBufLength(t_Handle h_FmPort, uint16_t newVal); /**************************************************************************//** @Function FM_PORT_ConfigIMRxBdRingLength @Description Changes the receive BD ring length from its default configuration:[128] @Param[in] h_FmPort A handle to a FM Port module. @Param[in] newVal The desired BD ring length. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). This routine is to be used only if Independent-Mode is enabled. *//***************************************************************************/ t_Error FM_PORT_ConfigIMRxBdRingLength(t_Handle h_FmPort, uint16_t newVal); /**************************************************************************//** @Function FM_PORT_ConfigIMTxBdRingLength @Description Changes the transmit BD ring length from its default configuration:[16] @Param[in] h_FmPort A handle to a FM Port module. @Param[in] newVal The desired BD ring length. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). This routine is to be used only if Independent-Mode is enabled. *//***************************************************************************/ t_Error FM_PORT_ConfigIMTxBdRingLength(t_Handle h_FmPort, uint16_t newVal); /**************************************************************************//** @Function FM_PORT_ConfigIMFmanCtrlExternalStructsMemory @Description Configures memory partition and attributes for FMan-Controller data structures (e.g. BD rings). Calling this routine changes the internal driver data base from its default configuration [0 , MEMORY_ATTR_CACHEABLE]. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] memId Memory partition ID. @Param[in] memAttributes Memory attributes mask (a combination of MEMORY_ATTR_x flags). @Return E_OK on success; Error code otherwise. *//***************************************************************************/ t_Error FM_PORT_ConfigIMFmanCtrlExternalStructsMemory(t_Handle h_FmPort, uint8_t memId, uint32_t memAttributes); /**************************************************************************//** @Function FM_PORT_ConfigIMPolling @Description Changes the Rx flow from interrupt driven (default) to polling. @Param[in] h_FmPort A handle to a FM Port module. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). This routine is to be used only if Independent-Mode is enabled. *//***************************************************************************/ t_Error FM_PORT_ConfigIMPolling(t_Handle h_FmPort); /** @} */ /* end of FM_PORT_advanced_init_grp group */ /** @} */ /* end of FM_PORT_init_grp group */ /**************************************************************************//** @Group FM_PORT_runtime_control_grp FM Port Runtime Control Unit @Description FM Port Runtime control unit API functions, definitions and enums. @{ *//***************************************************************************/ /**************************************************************************//** @Description enum for defining FM Port counters *//***************************************************************************/ typedef enum e_FmPortCounters { e_FM_PORT_COUNTERS_CYCLE, /**< BMI performance counter */ e_FM_PORT_COUNTERS_TASK_UTIL, /**< BMI performance counter */ e_FM_PORT_COUNTERS_QUEUE_UTIL, /**< BMI performance counter */ e_FM_PORT_COUNTERS_DMA_UTIL, /**< BMI performance counter */ e_FM_PORT_COUNTERS_FIFO_UTIL, /**< BMI performance counter */ e_FM_PORT_COUNTERS_RX_PAUSE_ACTIVATION, /**< BMI Rx only performance counter */ e_FM_PORT_COUNTERS_FRAME, /**< BMI statistics counter */ e_FM_PORT_COUNTERS_DISCARD_FRAME, /**< BMI statistics counter */ e_FM_PORT_COUNTERS_DEALLOC_BUF, /**< BMI deallocate buffer statistics counter */ e_FM_PORT_COUNTERS_RX_BAD_FRAME, /**< BMI Rx only statistics counter */ e_FM_PORT_COUNTERS_RX_LARGE_FRAME, /**< BMI Rx only statistics counter */ e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD, /**< BMI Rx only statistics counter */ e_FM_PORT_COUNTERS_RX_FILTER_FRAME, /**< BMI Rx & OP only statistics counter */ e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR, /**< BMI Rx, OP & HC only statistics counter */ e_FM_PORT_COUNTERS_WRED_DISCARD, /**< BMI OP & HC only statistics counter */ e_FM_PORT_COUNTERS_LENGTH_ERR, /**< BMI non-Rx statistics counter */ e_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT, /**< BMI non-Rx statistics counter */ e_FM_PORT_COUNTERS_DEQ_TOTAL, /**< QMI counter */ e_FM_PORT_COUNTERS_ENQ_TOTAL, /**< QMI counter */ e_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT, /**< QMI counter */ e_FM_PORT_COUNTERS_DEQ_CONFIRM /**< QMI counter */ } e_FmPortCounters; /**************************************************************************//** @Description Structure for Port id parameters. Fields commented 'IN' are passed by the port module to be used by the FM module. Fields commented 'OUT' will be filled by FM before returning to port. *//***************************************************************************/ typedef struct t_FmPortCongestionGrps { uint16_t numOfCongestionGrpsToConsider; /**< The number of required congestion groups to define the size of the following array */ uint8_t congestionGrpsToConsider[FM_PORT_NUM_OF_CONGESTION_GRPS]; /**< An array of 'numOfCongestionGrpsToConsider' describing the groups */ } t_FmPortCongestionGrps; #if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)) /**************************************************************************//** @Function FM_PORT_DumpRegs @Description Dump all regs. Calling this routine invalidates the descriptor. @Param[in] h_FmPort - FM PORT module descriptor @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_DumpRegs(t_Handle h_FmPort); #endif /* (defined(DEBUG_ERRORS) && ... */ /**************************************************************************//** @Function FM_PORT_GetBufferDataOffset @Description Relevant for Rx ports. Returns the data offset from the beginning of the data buffer @Param[in] h_FmPort - FM PORT module descriptor @Return data offset. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ uint32_t FM_PORT_GetBufferDataOffset(t_Handle h_FmPort); /**************************************************************************//** @Function FM_PORT_GetBufferICInfo @Description Returns the Internal Context offset from the beginning of the data buffer @Param[in] h_FmPort - FM PORT module descriptor @Param[in] p_Data - A pointer to the data buffer. @Return Internal context info pointer on success, NULL if 'allOtherInfo' was not configured for this port. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ uint8_t * FM_PORT_GetBufferICInfo(t_Handle h_FmPort, char *p_Data); #ifdef DEBUG /**************************************************************************//** @Function FM_PORT_GetBufferDebugInfo @Description Returns the debug info offset from the beginning of the data buffer @Param[in] h_FmPort - FM PORT module descriptor @Param[in] p_Data - A pointer to the data buffer. @Return Debug info pointer on success, NULL if 'passDebugInfo' was not configured for this port. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ uint8_t * FM_PORT_GetBufferDebugInfo(t_Handle h_FmPort, char *p_Data); #endif /* DEBUG */ /**************************************************************************//** @Function FM_PORT_GetBufferPrsResult @Description Returns the pointer to the parse result in the data buffer. In Rx ports this is relevant after reception, if parse result is configured to be part of the data passed to the application. For non Rx ports it may be used to get the pointer of the area in the buffer where parse result should be initialized - if so configured. See FM_PORT_ConfigBufferPrefixContent for data buffer prefix configuration. @Param[in] h_FmPort - FM PORT module descriptor @Param[in] p_Data - A pointer to the data buffer. @Return Parse result pointer on success, NULL if parse result was not configured for this port. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_FmPrsResult * FM_PORT_GetBufferPrsResult(t_Handle h_FmPort, char *p_Data); /**************************************************************************//** @Function FM_PORT_GetBufferTimeStamp @Description Returns the time stamp in the data buffer. Relevant for Rx ports for getting the buffer time stamp. See FM_PORT_ConfigBufferPrefixContent for data buffer prefix configuration. @Param[in] h_FmPort - FM PORT module descriptor @Param[in] p_Data - A pointer to the data buffer. @Return A pointer to the hash result on success, NULL otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ uint64_t * FM_PORT_GetBufferTimeStamp(t_Handle h_FmPort, char *p_Data); /**************************************************************************//** @Function FM_PORT_GetBufferHashResult @Description Given a data buffer, on the condition that hash result was defined as a part of the buffer content (see FM_PORT_ConfigBufferPrefixContent) this routine will return the pointer to the hash result location in the buffer prefix. @Param[in] h_FmPort - FM PORT module descriptor @Param[in] p_Data - A pointer to the data buffer. @Return A pointer to the hash result on success, NULL otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ uint8_t * FM_PORT_GetBufferHashResult(t_Handle h_FmPort, char *p_Data); /**************************************************************************//** @Function FM_PORT_Disable @Description Gracefully disable an FM port. The port will not start new tasks after all tasks associated with the port are terminated. @Param[in] h_FmPort A handle to a FM Port module. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). This is a blocking routine, it returns after port is gracefully stopped, i.e. the port will not except new frames, but it will finish all frames or tasks which were already began *//***************************************************************************/ t_Error FM_PORT_Disable(t_Handle h_FmPort); /**************************************************************************//** @Function FM_PORT_Enable @Description A runtime routine provided to allow disable/enable of port. @Param[in] h_FmPort A handle to a FM Port module. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_Enable(t_Handle h_FmPort); /**************************************************************************//** @Function FM_PORT_SetRateLimit @Description Calling this routine enables rate limit algorithm. By default, this functionality is disabled. Note that rate-limit mechanism uses the FM time stamp. The selected rate limit specified here would be rounded DOWN to the nearest 16M. May be used for Tx and offline parsing ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_RateLimit A structure of rate limit parameters @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_SetRateLimit(t_Handle h_FmPort, t_FmPortRateLimit *p_RateLimit); /**************************************************************************//** @Function FM_PORT_DeleteRateLimit @Description Calling this routine disables and clears rate limit initialization. May be used for Tx and offline parsing ports only @Param[in] h_FmPort A handle to a FM Port module. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_DeleteRateLimit(t_Handle h_FmPort); /**************************************************************************//** @Function FM_PORT_SetStatisticsCounters @Description Calling this routine enables/disables port's statistics counters. By default, counters are enabled. May be used for all port types @Param[in] h_FmPort A handle to a FM Port module. @Param[in] enable TRUE to enable, FALSE to disable. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_SetStatisticsCounters(t_Handle h_FmPort, bool enable); /**************************************************************************//** @Function FM_PORT_SetFrameQueueCounters @Description Calling this routine enables/disables port's enqueue/dequeue counters. By default, counters are enabled. May be used for all ports @Param[in] h_FmPort A handle to a FM Port module. @Param[in] enable TRUE to enable, FALSE to disable. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_SetFrameQueueCounters(t_Handle h_FmPort, bool enable); /**************************************************************************//** @Function FM_PORT_SetPerformanceCounters @Description Calling this routine enables/disables port's performance counters. By default, counters are enabled. May be used for all port types @Param[in] h_FmPort A handle to a FM Port module. @Param[in] enable TRUE to enable, FALSE to disable. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_SetPerformanceCounters(t_Handle h_FmPort, bool enable); /**************************************************************************//** @Function FM_PORT_SetPerformanceCounters @Description Calling this routine defines port's performance counters parameters. May be used for all port types @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_FmPortPerformanceCnt A pointer to a structure of performance counters parameters. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_SetPerformanceCountersParams(t_Handle h_FmPort, t_FmPortPerformanceCnt *p_FmPortPerformanceCnt); /**************************************************************************//** @Function FM_PORT_AnalyzePerformanceParams @Description User may call this routine to so the driver will analyze if the basic performance parameters are correct and also the driver may suggest of improvments; The basic parameters are FIFO sizes, number of DMAs and number of TNUMs for the port. May be used for all port types @Param[in] h_FmPort A handle to a FM Port module. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_AnalyzePerformanceParams(t_Handle h_FmPort); /**************************************************************************//** @Function FM_PORT_SetNumOfOpenDmas @Description Calling this routine updates the number of open DMA requested for this port. May be used for all port types. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_NumOfOpenDmas A structure of resource requested parameters @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_SetNumOfOpenDmas(t_Handle h_FmPort, t_FmPortRsrc *p_NumOfOpenDmas); /**************************************************************************//** @Function FM_PORT_SetNumOfTasks @Description Calling this routine updates the number of tasks requested for this port. May be used for all port types. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_NumOfTasks A structure of resource requested parameters @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_SetNumOfTasks(t_Handle h_FmPort, t_FmPortRsrc *p_NumOfTasks); /**************************************************************************//** @Function FM_PORT_SetSizeOfFifo @Description Calling this routine updates the Fifo size resource requested for this port. May be used for all port types - note that only Rx has 'extra' fifo size. For other ports 'extra' field must be disabled. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_SizeOfFifo A structure of resource requested parameters @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_SetSizeOfFifo(t_Handle h_FmPort, t_FmPortRsrc *p_SizeOfFifo); /**************************************************************************//** @Function FM_PORT_SetAllocBufCounter @Description Calling this routine enables/disables BM pool allocate buffer counters. By default, counters are enabled. May be used for Rx ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] poolId BM pool id. @Param[in] enable TRUE to enable, FALSE to disable. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_SetAllocBufCounter(t_Handle h_FmPort, uint8_t poolId, bool enable); /**************************************************************************//** @Function FM_PORT_GetCounter @Description Reads one of the FM PORT counters. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] fmPortCounter The requested counter. @Return Counter's current value. @Cautions Allowed only following FM_PORT_Init(). Note that it is user's responsibility to call this routine only for enabled counters, and there will be no indication if a disabled counter is accessed. *//***************************************************************************/ uint32_t FM_PORT_GetCounter(t_Handle h_FmPort, e_FmPortCounters fmPortCounter); /**************************************************************************//** @Function FM_PORT_ModifyCounter @Description Sets a value to an enabled counter. Use "0" to reset the counter. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] fmPortCounter The requested counter. @Param[in] value The requested value to be written into the counter. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ModifyCounter(t_Handle h_FmPort, e_FmPortCounters fmPortCounter, uint32_t value); /**************************************************************************//** @Function FM_PORT_GetAllocBufCounter @Description Reads one of the FM PORT buffer counters. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] poolId The requested pool. @Return Counter's current value. @Cautions Allowed only following FM_PORT_Init(). Note that it is user's responsibility to call this routine only for enabled counters, and there will be no indication if a disabled counter is accessed. *//***************************************************************************/ uint32_t FM_PORT_GetAllocBufCounter(t_Handle h_FmPort, uint8_t poolId); /**************************************************************************//** @Function FM_PORT_ModifyAllocBufCounter @Description Sets a value to an enabled counter. Use "0" to reset the counter. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] poolId The requested pool. @Param[in] value The requested value to be written into the counter. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ModifyAllocBufCounter(t_Handle h_FmPort, uint8_t poolId, uint32_t value); /**************************************************************************//** @Function FM_PORT_AddCongestionGrps @Description This routine effects the corresponding Tx port. It should be called in order to enable pause frame transmission in case of congestion in one or more of the congestion groups relevant to this port. Each call to this routine may add one or more congestion groups to be considered relevant to this port. May be used for Rx, or RX+OP ports only (depending on chip) @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_CongestionGrps A pointer to an array of congestion groups id's to consider. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_AddCongestionGrps(t_Handle h_FmPort, t_FmPortCongestionGrps *p_CongestionGrps); /**************************************************************************//** @Function FM_PORT_RemoveCongestionGrps @Description This routine effects the corresponding Tx port. It should be called when congestion groups were defined for this port and are no longer relevant, or pause frames transmitting is not required on their behalf. Each call to this routine may remove one or more congestion groups to be considered relevant to this port. May be used for Rx, or RX+OP ports only (depending on chip) @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_CongestionGrps A pointer to an array of congestion groups id's to consider. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_RemoveCongestionGrps(t_Handle h_FmPort, t_FmPortCongestionGrps *p_CongestionGrps); /**************************************************************************//** @Function FM_PORT_IsStalled @Description A routine for checking whether the specified port is stalled. @Param[in] h_FmPort A handle to a FM Port module. @Return TRUE if port is stalled, FALSE otherwize @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ bool FM_PORT_IsStalled(t_Handle h_FmPort); /**************************************************************************//** @Function FM_PORT_ReleaseStalled @Description This routine may be called in case the port was stalled and may now be released. @Param[in] h_FmPort A handle to a FM Port module. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_ReleaseStalled(t_Handle h_FmPort); /**************************************************************************//** @Function FM_PORT_SetRxL4ChecksumVerify @Description This routine is relevant for Rx ports (1G and 10G). The routine set/clear the L3/L4 checksum verification (on RX side). Note that this takes affect only if hw-parser is enabled! @Param[in] h_FmPort A handle to a FM Port module. @Param[in] l4Checksum boolean indicates whether to do L3/L4 checksum on frames or not. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_SetRxL4ChecksumVerify(t_Handle h_FmPort, bool l4Checksum); /**************************************************************************//** @Function FM_PORT_SetErrorsRoute @Description Errors selected for this routine will cause a frame with that error to be enqueued to error queue. Errors not selected for this routine will cause a frame with that error to be enqueued to the one of the other port queues. By default all errors are defined to be enqueued to error queue. Errors that were configured to be discarded (at initialization) may not be selected here. May be used for Rx and offline parsing ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] errs A list of errors to enqueue to error queue @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_SetErrorsRoute(t_Handle h_FmPort, fmPortFrameErrSelect_t errs); /**************************************************************************//** @Function FM_PORT_SetIMExceptions @Description Calling this routine enables/disables FM PORT interrupts. Note: Not available for guest partition. @Param[in] h_FmPort FM PORT module descriptor. @Param[in] exception The exception to be selected. @Param[in] enable TRUE to enable interrupt, FALSE to mask it. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_SetIMExceptions(t_Handle h_FmPort, e_FmPortExceptions exception, bool enable); /**************************************************************************//** @Group FM_PORT_pcd_runtime_control_grp FM Port PCD Runtime Control Unit @Description FM Port PCD Runtime control unit API functions, definitions and enums. @{ *//***************************************************************************/ /**************************************************************************//** @Description A structure defining the KG scheme after the parser. This is relevant only to change scheme selection mode - from direct to indirect and vice versa, or when the scheme is selected directly, to select the scheme id. *//***************************************************************************/ typedef struct t_FmPcdKgSchemeSelect { bool direct; /**< TRUE to use 'h_Scheme' directly, FALSE to use LCV.*/ t_Handle h_DirectScheme; /**< Relevant for 'direct'=TRUE only. 'h_DirectScheme' selects the scheme after parser. */ } t_FmPcdKgSchemeSelect; /**************************************************************************//** @Description A structure of scheme parameters *//***************************************************************************/ typedef struct t_FmPcdPortSchemesParams { uint8_t numOfSchemes; /**< Number of schemes for port to be bound to. */ t_Handle h_Schemes[FM_PCD_KG_NUM_OF_SCHEMES]; /**< Array of 'numOfSchemes' schemes for the port to be bound to */ } t_FmPcdPortSchemesParams; /**************************************************************************//** @Description Union for defining port protocol parameters for parser *//***************************************************************************/ typedef union u_FmPcdHdrPrsOpts { /* MPLS */ struct { bool labelInterpretationEnable; /**< When this bit is set, the last MPLS label will be interpreted as described in HW spec table. When the bit is cleared, the parser will advance to MPLS next parse */ e_NetHeaderType nextParse; /**< must be equal or higher than IPv4 */ } mplsPrsOptions; /* VLAN */ struct { uint16_t tagProtocolId1; /**< User defined Tag Protocol Identifier, to be recognized on VLAN TAG on top of 0x8100 and 0x88A8 */ uint16_t tagProtocolId2; /**< User defined Tag Protocol Identifier, to be recognized on VLAN TAG on top of 0x8100 and 0x88A8 */ } vlanPrsOptions; /* PPP */ struct{ bool enableMTUCheck; /**< Check validity of MTU according to RFC2516 */ } pppoePrsOptions; /* IPV6 */ struct{ bool routingHdrDisable; /**< Disable routing header */ } ipv6PrsOptions; /* UDP */ struct{ bool padIgnoreChecksum; /**< TRUE to ignore pad in checksum */ } udpPrsOptions; /* TCP */ struct { bool padIgnoreChecksum; /**< TRUE to ignore pad in checksum */ } tcpPrsOptions; } u_FmPcdHdrPrsOpts; /**************************************************************************//** @Description A structure for defining each header for the parser *//***************************************************************************/ typedef struct t_FmPcdPrsAdditionalHdrParams { e_NetHeaderType hdr; /**< Selected header */ bool errDisable; /**< TRUE to disable error indication */ bool swPrsEnable; /**< Enable jump to SW parser when this header is recognized by the HW parser. */ uint8_t indexPerHdr; /**< Normally 0, if more than one sw parser attachments exists for the same header, (in the main sw parser code) use this index to distinguish between them. */ bool usePrsOpts; /**< TRUE to use parser options. */ u_FmPcdHdrPrsOpts prsOpts; /**< A union according to header type, defining the parser options selected.*/ } t_FmPcdPrsAdditionalHdrParams; /**************************************************************************//** @Description struct for defining port PCD parameters *//***************************************************************************/ typedef struct t_FmPortPcdPrsParams { uint8_t prsResultPrivateInfo; /**< The private info provides a method of inserting port information into the parser result. This information may be extracted by Keygen and be used for frames distribution when a per-port distinction is required, it may also be used as a port logical id for analyzing incoming frames. */ uint8_t parsingOffset; /**< Number of bytes from beginning of packet to start parsing */ e_NetHeaderType firstPrsHdr; /**< The type of the first header expected at 'parsingOffset' */ bool includeInPrsStatistics; /**< TRUE to include this port in the parser statistics; NOTE: this field is not valid when the FN is in "guest" mode. */ uint8_t numOfHdrsWithAdditionalParams; /**< Normally 0, some headers may get special parameters */ t_FmPcdPrsAdditionalHdrParams additionalParams[FM_PCD_PRS_NUM_OF_HDRS]; /**< 'numOfHdrsWithAdditionalParams' structures of additional parameters for each header that requires them */ bool setVlanTpid1; /**< TRUE to configure user selection of Ethertype to indicate a VLAN tag (in addition to the TPID values 0x8100 and 0x88A8). */ uint16_t vlanTpid1; /**< extra tag to use if setVlanTpid1=TRUE. */ bool setVlanTpid2; /**< TRUE to configure user selection of Ethertype to indicate a VLAN tag (in addition to the TPID values 0x8100 and 0x88A8). */ uint16_t vlanTpid2; /**< extra tag to use if setVlanTpid1=TRUE. */ } t_FmPortPcdPrsParams; /**************************************************************************//** @Description struct for defining coarse alassification parameters *//***************************************************************************/ typedef struct t_FmPortPcdCcParams { t_Handle h_CcTree; /**< A handle to a CC tree */ } t_FmPortPcdCcParams; /**************************************************************************//** @Description struct for defining keygen parameters *//***************************************************************************/ typedef struct t_FmPortPcdKgParams { uint8_t numOfSchemes; /**< Number of schemes for port to be bound to. */ t_Handle h_Schemes[FM_PCD_KG_NUM_OF_SCHEMES]; /**< Array of 'numOfSchemes' schemes handles for the port to be bound to */ bool directScheme; /**< TRUE for going from parser to a specific scheme, regardless of parser result */ t_Handle h_DirectScheme; /**< relevant only if direct == TRUE, Scheme handle, as returned by FM_PCD_KgSetScheme */ } t_FmPortPcdKgParams; /**************************************************************************//** @Description struct for defining policer parameters *//***************************************************************************/ typedef struct t_FmPortPcdPlcrParams { t_Handle h_Profile; /**< Selected profile handle; Relevant for one of following cases: e_FM_PORT_PCD_SUPPORT_PLCR_ONLY or e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR were selected, or if any flow uses a KG scheme were policer profile is not generated (bypassPlcrProfileGeneration selected) */ } t_FmPortPcdPlcrParams; /**************************************************************************//** @Description struct for defining port PCD parameters *//***************************************************************************/ typedef struct t_FmPortPcdParams { e_FmPortPcdSupport pcdSupport; /**< Relevant for Rx and offline ports only. Describes the active PCD engines for this port. */ t_Handle h_NetEnv; /**< HL Unused in PLCR only mode */ t_FmPortPcdPrsParams *p_PrsParams; /**< Parser parameters for this port */ t_FmPortPcdCcParams *p_CcParams; /**< Coarse classification parameters for this port */ t_FmPortPcdKgParams *p_KgParams; /**< Keygen parameters for this port */ t_FmPortPcdPlcrParams *p_PlcrParams; /**< Policer parameters for this port */ } t_FmPortPcdParams; /**************************************************************************//** @Description A structure for defining the Parser starting point *//***************************************************************************/ typedef struct t_FmPcdPrsStart { uint8_t parsingOffset; /**< Number of bytes from beginning of packet to start parsing */ e_NetHeaderType firstPrsHdr; /**< The type of the first header axpected at 'parsingOffset' */ } t_FmPcdPrsStart; /**************************************************************************//** @Function FM_PORT_SetPCD @Description Calling this routine defines the port's PCD configuration. It changes it from its default configuration which is PCD disabled (BMI to BMI) and configures it according to the passed parameters. May be used for Rx and offline parsing ports only @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_FmPortPcd A Structure of parameters defining the port's PCD configuration. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_SetPCD(t_Handle h_FmPort, t_FmPortPcdParams *p_FmPortPcd); /**************************************************************************//** @Function FM_PORT_DeletePCD @Description Calling this routine releases the port's PCD configuration. The port returns to its default configuration which is PCD disabled (BMI to BMI) and all PCD configuration is removed. May be used for Rx and offline parsing ports which are in PCD mode only @Param[in] h_FmPort A handle to a FM Port module. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_DeletePCD(t_Handle h_FmPort); /**************************************************************************//** @Function FM_PORT_AttachPCD @Description This routine may be called after FM_PORT_DetachPCD was called, to return to the originally configured PCD support flow. The couple of routines are used to allow PCD configuration changes that demand that PCD will not be used while changes take place. May be used for Rx and offline parsing ports which are in PCD mode only @Param[in] h_FmPort A handle to a FM Port module. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). *//***************************************************************************/ t_Error FM_PORT_AttachPCD(t_Handle h_FmPort); /**************************************************************************//** @Function FM_PORT_DetachPCD @Description Calling this routine detaches the port from its PCD functionality. The port returns to its default flow which is BMI to BMI. May be used for Rx and offline parsing ports which are in PCD mode only @Param[in] h_FmPort A handle to a FM Port module. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_AttachPCD(). *//***************************************************************************/ t_Error FM_PORT_DetachPCD(t_Handle h_FmPort); /**************************************************************************//** @Function FM_PORT_PcdPlcrAllocProfiles @Description This routine may be called only for ports that use the Policer in order to allocate private policer profiles. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] numOfProfiles The number of required policer profiles @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init() and FM_PCD_Init(), and before FM_PORT_SetPCD(). *//***************************************************************************/ t_Error FM_PORT_PcdPlcrAllocProfiles(t_Handle h_FmPort, uint16_t numOfProfiles); /**************************************************************************//** @Function FM_PORT_PcdPlcrFreeProfiles @Description This routine should be called for freeing private policer profiles. @Param[in] h_FmPort A handle to a FM Port module. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init() and FM_PCD_Init(), and before FM_PORT_SetPCD(). *//***************************************************************************/ t_Error FM_PORT_PcdPlcrFreeProfiles(t_Handle h_FmPort); /**************************************************************************//** @Function FM_PORT_PcdKgModifyInitialScheme @Description This routine may be called only for ports that use the keygen in order to change the initial scheme frame should be routed to. The change may be of a scheme id (in case of direct mode), from direct to indirect, or from indirect to direct - specifying the scheme id. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_FmPcdKgScheme A structure of parameters for defining whether a scheme is direct/indirect, and if direct - scheme id. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD(). *//***************************************************************************/ t_Error FM_PORT_PcdKgModifyInitialScheme (t_Handle h_FmPort, t_FmPcdKgSchemeSelect *p_FmPcdKgScheme); /**************************************************************************//** @Function FM_PORT_PcdPlcrModifyInitialProfile @Description This routine may be called for ports with flows e_FM_PORT_PCD_SUPPORT_PLCR_ONLY or e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR only, to change the initial Policer profile frame should be routed to. The change may be of a profile and/or absolute/direct mode selection. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] h_Profile Policer profile handle @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD(). *//***************************************************************************/ t_Error FM_PORT_PcdPlcrModifyInitialProfile (t_Handle h_FmPort, t_Handle h_Profile); /**************************************************************************//** @Function FM_PORT_PcdCcModifyTree @Description This routine may be called for ports that use coarse classification tree if the user wishes to replace the tree. The routine may not be called while port receives packets using the PCD functionalities, therefor port must be first detached from the PCD, only than the routine may be called, and than port be attached to PCD again. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] h_CcTree A CC tree that was already built. The tree id as returned from the BuildTree routine. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(), FM_PORT_SetPCD() and FM_PORT_DetachPCD() *//***************************************************************************/ t_Error FM_PORT_PcdCcModifyTree (t_Handle h_FmPort, t_Handle h_CcTree); /**************************************************************************//** @Function FM_PORT_PcdKgBindSchemes @Description These routines may be called for adding more schemes for the port to be bound to. The selected schemes are not added, just this specific port starts using them. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_PortScheme A structure defining the list of schemes to be added. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD(). *//***************************************************************************/ t_Error FM_PORT_PcdKgBindSchemes (t_Handle h_FmPort, t_FmPcdPortSchemesParams *p_PortScheme); /**************************************************************************//** @Function FM_PORT_PcdKgUnbindSchemes @Description These routines may be called for adding more schemes for the port to be bound to. The selected schemes are not removed or invalidated, just this specific port stops using them. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_PortScheme A structure defining the list of schemes to be added. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD(). *//***************************************************************************/ t_Error FM_PORT_PcdKgUnbindSchemes (t_Handle h_FmPort, t_FmPcdPortSchemesParams *p_PortScheme); /**************************************************************************//** @Function FM_PORT_PcdPrsModifyStartOffset @Description Runtime change of the parser start offset within the header. The routine may not be called while port receives packets using the PCD functionalities, therefore port must be first detached from the PCD, only than the routine may be called, and than port be attached to PCD again. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_FmPcdPrsStart A structure of parameters for defining the start point for the parser. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(), FM_PORT_SetPCD() and FM_PORT_DetatchPCD(). *//***************************************************************************/ t_Error FM_PORT_PcdPrsModifyStartOffset (t_Handle h_FmPort, t_FmPcdPrsStart *p_FmPcdPrsStart); /** @} */ /* end of FM_PORT_pcd_runtime_control_grp group */ /** @} */ /* end of FM_PORT_runtime_control_grp group */ /**************************************************************************//** @Group FM_PORT_runtime_data_grp FM Port Runtime Data-path Unit @Description FM Port Runtime data unit API functions, definitions and enums. This API is valid only if working in Independent-Mode. @{ *//***************************************************************************/ /**************************************************************************//** @Function FM_PORT_ImTx @Description Tx function, called to transmit a data buffer on the port. @Param[in] h_FmPort A handle to a FM Port module. @Param[in] p_Data A pointer to an LCP data buffer. @Param[in] length Size of data for transmission. @Param[in] lastBuffer Buffer position - TRUE for the last buffer of a frame, including a single buffer frame @Param[in] h_BufContext A handle of the user acossiated with this buffer @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). NOTE - This routine can be used only when working in Independent-Mode mode. *//***************************************************************************/ t_Error FM_PORT_ImTx( t_Handle h_FmPort, uint8_t *p_Data, uint16_t length, bool lastBuffer, t_Handle h_BufContext); /**************************************************************************//** @Function FM_PORT_ImTxConf @Description Tx port confirmation routine, optional, may be called to verify transmission of all frames. The procedure performed by this routine will be performed automatically on next buffer transmission, but if desired, calling this routine will invoke this action on demand. @Param[in] h_FmPort A handle to a FM Port module. @Cautions Allowed only following FM_PORT_Init(). NOTE - This routine can be used only when working in Independent-Mode mode. *//***************************************************************************/ void FM_PORT_ImTxConf(t_Handle h_FmPort); /**************************************************************************//** @Function FM_PORT_ImRx @Description Rx function, may be called to poll for received buffers. Normally, Rx process is invoked by the driver on Rx interrupt. Alternatively, this routine may be called on demand. @Param[in] h_FmPort A handle to a FM Port module. @Return E_OK on success; Error code otherwise. @Cautions Allowed only following FM_PORT_Init(). NOTE - This routine can be used only when working in Independent-Mode mode. *//***************************************************************************/ t_Error FM_PORT_ImRx(t_Handle h_FmPort); /** @} */ /* end of FM_PORT_runtime_data_grp group */ /** @} */ /* end of FM_PORT_grp group */ /** @} */ /* end of FM_grp group */ #endif /* __FM_PORT_EXT */