.Dd November 16, 1994 .Dt IPFW(4)/IPACCT 4 .Os .Sh NAME ipfirewall,ipfw - IP packets filter. ipaccounting,ipacct - IP packets/traffic accounting. .Sh SYNOPSIS #include setsockopt(raw_socket,IPPROTO_IP,, ,) Ipfw options: IP_FW_ADD_BLK - add entry to blocking chain. IP_FW_ADD_FWD - add entry to forwarding chain. IP_FW_CHK_BLK - check ip packet against blocking chain. IP_FW_CHK_FWD - check ip packet against forwarding chain. IP_FW_DEL_BLK - delete entry from blocking chain. IP_FW_DEL_FWD - delete entry from forwarding chain. IP_FW_FLUSH - flush all blocking & forwarding chain entries. IP_FW_POLICY - define default ipfw policy. Ipacct options: IP_ACCT_ADD - add entry to accounting chain. IP_ACCT_DEL - delete entry from accounting chain. IP_ACCT_FLUSH - flush all accounting chain entries. IP_ACCT_ZERO - zero all accounting chain entries. Ipfw/ipacct entry structure: #define IP_FW_MAX_PORTS 10 struct ip_fw { struct ip_fw *next; struct in_addr src, dst; struct in_addr src_mask, dst_mask; u_short flags; u_short n_src_p, n_dst_p; u_short ports[IP_FW_MAX_PORTS]; u_long p_cnt,b_cnt; } Flags values for "flags" field: IP_FW_F_ALL - The entry should match all IP packets. IP_FW_F_TCP - The entry should match TCP packets. IP_FW_F_UDP - The entry should match UDP packets. IP_FW_F_ICMP - The entry should match ICMP packets. IP_FW_F_KIND - Mask value to separate protocol kind. IP_FW_F_ACCEPT - This entry is accepting ( see below ) IP_FW_F_SRNG - Source ports are range ( see below ) IP_FW_F_DRNG - Destination ports are range ( see below ) IP_FW_F_PRN - Print this entry ( see below ) IP_FW_F_BIDIR - This acct entry is bidirectional ( see below ) IP_FW_F_MASK - Mask to match all valid flag bits. Kernel symbols to kvm_nlist(): struct ip_fw *ip_fw_blk_chain - chain of forwarding entries. struct ip_fw *ip_fw_fwd_chain - chain of blocking entries. int ip_fw_policy - default policy. struct ip_fw *ip_acct_chain - chain of accounting entries. Options in the kernel configuration file: IPFIREWALL - enable ipfirewall. IPFIREWALL_VERBOSE - enable firewall output ( see below ) DEBUG_IPFIREWALL - enable extensive debugging output. IPACCT - enable ipaccounting. .Sh DESCRIPTION Ipfirewall (later ipfw) is a system facility,which allows filtering of incoming and/or forwarding packets on the protocol+source/destination adress/ports base. Ipaccounting (later ipacct) is a system facility,which allows counting of incoming,outgoing and forwarding traffic by packet/byte count. Basic idea is that every packet checked against number of entries in several chains.There are 3 chains: Blocking - this chain defines whenever packet should be accepted ever for local delivery or for forwarding. Forwarding - this chain defines whenever packet should be accepted for forwarding only. Accounting - this chain defines types of packets , which should be counted. Entries added to chains by means of setsockopt() call on RAW IP socket. Options to add/remove specific entries or to flush all entries described above. Value passed to setsockopt() is a value of struct ip_fw for entry. If entry added , it checked by such rules that when we start searching chain for matching entry the first matching is the best match, [ or at least one of them :^) ]. That means: * First in chain entries with specific protocol and small ranges of src/dst adresses and ports. * Later going entries with wider ranges of ports and adresses. * Later entries matching every port for some adress range. * Later universal entries matching any protocol. While deleting entry , every entry which equal to that passed to setsockopt() will be removed. Flush removes all entries. Every entry have several fields,by which packets matched: struct ip_fw *next - next entry in chain.(Set internally) struct in_addr src - source adress to be matched. struct in_addr src_mask - source adress mask. To match whole networks/subnets or adress groups mask bits should be zeroed here and also in src_mask field. Valuable bits should be set in src_mask field. struct in_addr dst - destination adress to be matched. struct in_addr dst_mask - destination adress mask. u_short flags - flags field.See exact description of flags meaning in description later. u_short n_src_p - number of source ports in "ports" array. u_short n_dst_p - number of destination ports in "ports" array. u_short ports[] - ports array.Overall length currently defined to reasonable maximum - 10,and could be changed. The packet's src port can ever match one of ports[0] ... ports[--n_src_p] numbers,or if flag IP_FW_F_SRNG set take port[0] as bottom range value and ports[1] as top one.n_src_p should be set to 2 then.If n_src_p equal to 0 , every port match. The same rules apply to packet's dst port, except that it matched against ports[n_src_p] ... ... ports[n_src_p+n_dst_p--],or if IP_FW_F_DRNG set, range is ports[n_src_p] to ports[n_srcp++]. u_long p_cnt - packets count for ipacct entries. u_long b_cnt - bytes count for ipacct entries. Packet matching proceeds in following way: a) If packet entry protocol set to ALL, see c). b) If entry protocol set to TCP/UDP/ICMP and packet protocol different - no match,if packet protocol and entry protocol same - continue. c) If source addres pattern does not equal to packets sources adress masked with src_mask , or destination pattern not equal to packets destination adress masked with dst_mask - no match. If they does and protocol set to ALL/ICMP - got match. If they does and protocol set to TCP/UDP - continue. d) If src port doesn't match or dst port doesn't match - all packet don't match. If they does - got match. In ipfw packet matched consequently against every chain entry. Search continues untill first matching entry found.If IP_FW_F_ACCEPT flag set - packet accepted.If it is not set - packet denied. If no matching entry found , all unmatched packets ever accepted or denied depending on global polici value. It can be set with IP_FW_POLICY raw socket option. Deny value is 0, other values (default 1) is accept. Entries can be added with IP_FW_F_PRN flag set.If kernel compiled with IPFIREWALL_VERBOSE option,packets matching this entries will be printed by kernel printf's. If some chain is empty,every packet accepted by this chain no matter what default policy is. To check whenever or not packet denied by some chain , checking options to setsockopt() can be issued. Then the argument is a buffer representing ip packet,thus it has to be struct ip + struct tcphdr . Then setsockopt() return value 0 on accept or another on deny. Ipaccounting entries added the same way as ipfw ones.Packet checked against all entries in chain and values of p_cnt and b_cnt in matching entries rised.p_cnt rises by 1 and b_cnt by ip_len value of ip packet. Thus all traffic size counted including IP headers. If IP_FW_F_BIDIR flag is set in accounting entry,packets counted are those which match entry in standart way along with packets which match entry while their source and destination addr/port pairs swapped. Zero option allows all accounting to be cleared. .Sh DIAGNOSTICS [EINVAL] The IP option field was improperly formed; an option field was shorter than the minimum value or longer than the option buffer provided.An structural error in ip_fw structure occured (n_src_p+n_dst_p too big, ports set for ALL/ICMP protocols etc.) .Sh SEE ALSO ip(4), setsockopt(2), kvm_nlist(3), kvm_read(3) .Sh BUGS Ipfw/ipacct facilities are new and , although serious bugs has been tracked,some less important ones expected. This man page also uncomplete bad styled. .Sh HISTORY Ipfw facility has been intitially written as package to BSDI by Daniel Boulet . It has been havily modified and ported to FreeBSD 2.0 by Ugen J.S.Antsilevich Ipacct facility written for FreeBSD 2.0 by Ugen J.S.Antsilevich