'\"
'\" Copyright (c) 1991-1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\" 
'\" SCCS: @(#) library.n 1.20 96/03/25 20:18:29
.so man.macros
.TH library n "" Tcl "Tcl Built-In Commands"
.BS
.SH NAME
library \- standard library of Tcl procedures
.SH SYNOPSIS
.nf
\fBauto_execok \fIcmd\fR
\fBauto_load \fIcmd\fR
\fBauto_mkindex \fIdir pattern pattern ...\fR
\fBauto_reset\fR
\fBparray \fIarrayName\fR
.BE

.SH INTRODUCTION
.PP
Tcl includes a library of Tcl procedures for commonly-needed functions.
The procedures defined in the Tcl library are generic ones suitable
for use by many different applications.
The location of the Tcl library is returned by the \fBinfo library\fR
command.
In addition to the Tcl library, each application will normally have
its own library of support procedures as well;  the location of this
library is normally given by the value of the \fB$\fIapp\fB_library\fR
global variable, where \fIapp\fR is the name of the application.
For example, the location of the Tk library is kept in the variable
\fB$tk_library\fR.
.PP
To access the procedures in the Tcl library, an application should
source the file \fBinit.tcl\fR in the library, for example with
the Tcl command
.CS
\fBsource [info library]/init.tcl\fR
.CE
If the library procedure \fBTcl_Init\fR is invoked from an application's
\fBTcl_AppInit\fR procedure, this happens automatically.
The code in \fBinit.tcl\fR will define the \fBunknown\fR procedure
and arrange for the other procedures to be loaded on-demand using
the auto-load mechanism defined below.

.SH "COMMAND PROCEDURES"
.PP
The following procedures are provided in the Tcl library:
.TP
\fBauto_execok \fIcmd\fR
Determines whether there is an executable file by the name \fIcmd\fR.
This command examines the directories in the current search path
(given by the PATH environment variable) to see if there is an
executable file named \fIcmd\fR in any of those directories.
If so, it returns 1;  if not it returns 0.  \fBAuto_exec\fR
remembers information about previous searches in an array
named \fBauto_execs\fR;  this avoids the path search in
future calls for the same \fIcmd\fR.  The command \fBauto_reset\fR
may be used to force \fBauto_execok\fR to forget its cached
information.
.TP
\fBauto_load \fIcmd\fR
This command attempts to load the definition for a Tcl command named
\fIcmd\fR.
To do this, it searches an \fIauto-load path\fR, which is a list of
one or more directories.
The auto-load path is given by the global variable \fB$auto_path\fR
if it exists.
If there is no \fB$auto_path\fR variable, then the TCLLIBPATH environment
variable is used, if it exists.
Otherwise the auto-load path consists of just the Tcl library directory.
Within each directory in the auto-load path there must be a file
\fBtclIndex\fR that describes one
.VS
or more commands defined in that directory
and a script to evaluate to load each of the commands.
The \fBtclIndex\fR file should be generated with the
\fBauto_mkindex\fR command.
If \fIcmd\fR is found in an index file, then the appropriate
script is evaluated to create the command.
.VE
The \fBauto_load\fR command returns 1 if \fIcmd\fR was successfully
created.
The command returns 0 if there was no index entry for \fIcmd\fR
or if the script didn't actually define \fIcmd\fR (e.g. because
index information is out of date).
If an error occurs while processing the script, then that error
is returned.
\fBAuto_load\fR only reads the index information once and saves it
in the array \fBauto_index\fR;  future calls to \fBauto_load\fR
check for \fIcmd\fR in the array rather than re-reading the index
files.
The cached index information may be deleted with the command
\fBauto_reset\fR.
This will force the next \fBauto_load\fR command to reload the
index database from disk.
.TP
\fBauto_mkindex \fIdir pattern pattern ...\fR
.VS
Generates an index suitable for use by \fBauto_load\fR.
The command searches \fIdir\fR for all files whose names match
any of the \fIpattern\fR arguments
.VE
(matching is done with the \fBglob\fR command),
generates an index of all the Tcl command
procedures defined in all the matching files, and stores the
index information in a file named \fBtclIndex\fR in \fIdir\fR.
If no pattern is given a pattern of \fB*.tcl\fR will be assumed.  
For example, the command
.RS
.CS
\fBauto_mkindex foo *.tcl\fR
.CE
.LP
will read all the \fB.tcl\fR files in subdirectory \fBfoo\fR
and generate a new index file \fBfoo/tclIndex\fR.
.PP
\fBAuto_mkindex\fR parses the Tcl scripts in a relatively
unsophisticated way:  if any line contains the word \fBproc\fR
as its first characters then it is assumed to be a procedure
definition and the next word of the line is taken as the
procedure's name.
Procedure definitions that don't appear in this way (e.g. they
have spaces before the \fBproc\fR) will not be indexed.
.RE
.TP
\fBauto_reset\fR
Destroys all the information cached by \fBauto_execok\fR and
\fBauto_load\fR.
This information will be re-read from disk the next time it is
needed.
\fBAuto_reset\fR also deletes any procedures listed in the auto-load
index, so that fresh copies of them will be loaded the next time
that they're used.
.TP
\fBparray \fIarrayName\fR
Prints on standard output the names and values of all the elements
in the array \fIarrayName\fR.
\fBArrayName\fR must be an array accessible to the caller of \fBparray\fR.
It may be either local or global.

.SH "VARIABLES"
.PP
The following global variables are defined or used by the procedures in
the Tcl library:
.TP
\fBauto_execs\fR
Used by \fBauto_execok\fR to record information about whether
particular commands exist as executable files.
.TP
\fBauto_index\fR
Used by \fBauto_load\fR to save the index information read from
disk.
.TP
\fBauto_noexec\fR
If set to any value, then \fBunknown\fR will not attempt to auto-exec
any commands.
.TP
\fBauto_noload\fR
If set to any value, then \fBunknown\fR will not attempt to auto-load
any commands.
.TP
\fBauto_path\fR
If set, then it must contain a valid Tcl list giving directories to
search during auto-load operations.
.TP
\fBenv(TCL_LIBRARY)\fR
If set, then it specifies the location of the directory containing
library scripts (the value of this variable will be returned by
the command \fBinfo library\fR).  If this variable isn't set then
a default value is used.
.TP
\fBenv(TCLLIBPATH)\fR
If set, then it must contain a valid Tcl list giving directories to
search during auto-load operations.
This variable is only used if \fBauto_path\fR is not defined.
.TP
\fBunknown_active\fR
This variable is set by \fBunknown\fR to indicate that it is active.
It is used to detect errors where \fBunknown\fR recurses on itself
infinitely.
The variable is unset before \fBunknown\fR returns.

.SH KEYWORDS
auto-exec, auto-load, library, unknown