# This is the installation configuration file for my test machine, # crate.cdrom.com. # It is included here merely as a sort-of-documented example. # Turn on extra debugging. debug=yes ################################ # My host specific data hostname=crate.cdrom.com domainname=cdrom.com nameserver=204.216.27.3 defaultrouter=204.216.27.228 ipaddr=204.216.27.230 netmask=255.255.255.240 ################################ ################################ # Which installation device to use - ftp is pointed directly at my local # machine and the installation device is my WD8013 ethernet interface. ftp=ftp://time.cdrom.com/pub netDev=ed0 mediaSetFTP ################################ ################################ # Select which distributions we want. dists=bin doc manpages info compat21 des src sbase slkm ssys distSetCustom ################################ ################################ # Now set the parameters for the partition editor on wd0. Set to use the # disk exclusively (could also be "all" to use the whole disk but # respecting the MBR or "free" to use only unallocated space for FreeBSD). disk=wd0 partition=exclusive diskPartitionEditor # Uncomment this instead to use only the free space and install boot manager. #partition=free #bootManager=booteasy #diskPartitionEditor ################################ ################################ # This assumes that slice 1 is a DOS partition and mounts it as /dos, # which is the case on my laptop. # # All sizes are expressed in 512 byte blocks! # A 20MB root partition wd0s1-1=ufs 40960 / # And a 20MB swap partition wd0s1-2=swap 40960 none # Followed by a /usr partition using all remaining space (size 0 = free space) wd0s1-3=ufs 0 /usr # Let's do it! diskLabelEditor ################################ ################################ # Now partition the 2nd disk. disk=wd1 partition=exclusive diskPartitionEditor wd1s1-1=ufs 40960 /var wd1s1-2=ufs 0 /usr/src diskLabelEditor ################################ ################################ # And the 3rd. disk=sd0 partition=exclusive diskPartitionEditor sd0s1-1=swap 40960 none sd0s1-2=ufs 0 /tmp diskLabelEditor ################################ # OK, everything is set. Do it! installCommit # Install some packages at the end. package=bash-1.14.7 packageAdd package=ncftp-2.4.2 packageAdd package=tcsh-6.07.02 packageAdd