/* $NetBSD: octeonreg.h,v 1.1 2002/03/07 14:44:04 simonb Exp $ */ /* * Copyright 2002 Wasabi Systems, Inc. * All rights reserved. * * Written by Simon Burge for Wasabi Systems, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed for the NetBSD Project by * Wasabi Systems, Inc. * 4. The name of Wasabi Systems, Inc. may not be used to endorse * or promote products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* Memory Map 0000.0000 * 128MB Typically SDRAM (on Core Board) 0800.0000 * 256MB Typically PCI 1800.0000 * 62MB Typically PCI 1be0.0000 * 2MB Typically System controller's internal registers 1c00.0000 * 32MB Typically not used 1e00.0000 4MB Monitor Flash 1e40.0000 12MB reserved 1f00.0000 12MB Switches LEDs ASCII display Soft reset FPGA revision number CBUS UART (tty2) General Purpose I/O I2C controller 1f10.0000 * 11MB Typically System Controller specific 1fc0.0000 4MB Maps to Monitor Flash 1fd0.0000 * 3MB Typically System Controller specific * depends on implementation of the Core Board and of software */ /* CPU interrupts NMI South Bridge or NMI button 0 South Bridge INTR 1 South Bridge SMI 2 CBUS UART (tty2) 3 COREHI (Core Card) 4 CORELO (Core Card) 5 Not used, driven inactive (typically CPU internal timer interrupt IRQ mapping (as used by YAMON) 0 Timer South Bridge 1 Keyboard SuperIO 2 Reserved by South Bridge (for cascading) 3 UART (tty1) SuperIO 4 UART (tty0) SuperIO 5 Not used 6 Floppy Disk SuperIO 7 Parallel Port SuperIO 8 Real Time Clock South Bridge 9 I2C bus South Bridge 10 PCI A,B,eth PCI slot 1..4, Ethernet 11 PCI C,audio PCI slot 1..4, Audio, USB (South Bridge) PCI D,USB 12 Mouse SuperIO 13 Reserved by South Bridge 14 Primary IDE Primary IDE slot 15 Secondary IDE Secondary IDE slot/Compact flash connector */ #define OCTEON_SYSTEMRAM_BASE 0x00000000 /* System RAM: */ #define OCTEON_SYSTEMRAM_SIZE 0x08000000 /* 128 MByte */ #define OCTEON_PCIMEM1_BASE 0x08000000 /* PCI 1 memory: */ #define OCTEON_PCIMEM1_SIZE 0x08000000 /* 128 MByte */ #define OCTEON_PCIMEM2_BASE 0x10000000 /* PCI 2 memory: */ #define OCTEON_PCIMEM2_SIZE 0x08000000 /* 128 MByte */ #define OCTEON_PCIMEM3_BASE 0x18000000 /* PCI 3 memory */ #define OCTEON_PCIMEM3_SIZE 0x03e00000 /* 62 MByte */ #define OCTEON_CORECTRL_BASE 0x1be00000 /* Core control: */ #define OCTEON_CORECTRL_SIZE 0x00200000 /* 2 MByte */ #define OCTEON_RESERVED_BASE1 0x1c000000 /* Reserved: */ #define OCTEON_RESERVED_SIZE1 0x02000000 /* 32 MByte */ #define OCTEON_MONITORFLASH_BASE 0x1e000000 /* Monitor Flash: */ #define OCTEON_MONITORFLASH_SIZE 0x003e0000 /* 4 MByte */ #define OCTEON_MONITORFLASH_SECTORSIZE 0x00010000 /* Sect. = 64 KB */ #define OCTEON_FILEFLASH_BASE 0x1e3e0000 /* File Flash (for monitor): */ #define OCTEON_FILEFLASH_SIZE 0x00020000 /* 128 KByte */ #define OCTEON_FILEFLASH_SECTORSIZE 0x00010000 /* Sect. = 64 KB */ #define OCTEON_RESERVED_BASE2 0x1e400000 /* Reserved: */ #define OCTEON_RESERVED_SIZE2 0x00c00000 /* 12 MByte */ #define OCTEON_FPGA_BASE 0x1f000000 /* FPGA: */ #define OCTEON_FPGA_SIZE 0x00c00000 /* 12 MByte */ #define OCTEON_NMISTATUS (OCTEON_FPGA_BASE + 0x24) #define OCTEON_NMI_SB 0x2 /* Pending NMI from the South Bridge */ #define OCTEON_NMI_ONNMI 0x1 /* Pending NMI from the ON/NMI push button */ #define OCTEON_NMIACK (OCTEON_FPGA_BASE + 0x104) #define OCTEON_NMIACK_ONNMI 0x1 /* Write 1 to acknowledge ON/NMI */ #define OCTEON_SWITCH (OCTEON_FPGA_BASE + 0x200) #define OCTEON_SWITCH_MASK 0xff /* settings of DIP switch S2 */ #define OCTEON_STATUS (OCTEON_FPGA_BASE + 0x208) #define OCTEON_ST_MFWR 0x10 /* Monitor Flash is write protected (JP1) */ #define OCTEON_S54 0x08 /* switch S5-4 - set YAMON factory default mode */ #define OCTEON_S53 0x04 /* switch S5-3 */ #define OCTEON_BIGEND 0x02 /* switch S5-2 - big endian mode */ #define OCTEON_JMPRS (OCTEON_FPGA_BASE + 0x210) #define OCTEON_JMPRS_PCICLK 0x1c /* PCI clock frequency */ #define OCTEON_JMPRS_EELOCK 0x02 /* I2C EEPROM is write protected */ #define OCTEON_LEDBAR (OCTEON_FPGA_BASE + 0x408) #define OCTEON_ASCIIWORD (OCTEON_FPGA_BASE + 0x410) #define OCTEON_ASCII_BASE (OCTEON_FPGA_BASE + 0x418) #define OCTEON_ASCIIPOS0 0x00 #define OCTEON_ASCIIPOS1 0x08 #define OCTEON_ASCIIPOS2 0x10 #define OCTEON_ASCIIPOS3 0x18 #define OCTEON_ASCIIPOS4 0x20 #define OCTEON_ASCIIPOS5 0x28 #define OCTEON_ASCIIPOS6 0x30 #define OCTEON_ASCIIPOS7 0x38 #define OCTEON_SOFTRES (OCTEON_FPGA_BASE + 0x500) #define OCTEON_GORESET 0x42 /* write this to OCTEON_SOFTRES for board reset */ /* * BRKRES is the number of milliseconds before a "break" on tty will * trigger a reset. A value of 0 will disable the reset. */ #define OCTEON_BRKRES (OCTEON_FPGA_BASE + 0x508) #define OCTEON_BRKRES_MASK 0xff #define OCTEON_CBUSUART 0x8001180000000800ull /* 16C550C UART, 8 bit registers on 8 byte boundaries */ /* RXTX 0x00 */ /* INTEN 0x08 */ /* IIFIFO 0x10 */ /* LCTRL 0x18 */ /* MCTRL 0x20 */ /* LSTAT 0x28 */ /* MSTAT 0x30 */ /* SCRATCH 0x38 */ #define OCTEON_CBUSUART_INTR 2 #define OCTEON_GPIO_BASE (OCTEON_FPGA_BASE + 0xa00) #define OCTEON_GPOUT 0x0 #define OCTEON_GPINP 0x8 #define OCTEON_BOOTROM_BASE 0x1fc00000 /* Boot ROM: */ #define OCTEON_BOOTROM_SIZE 0x00400000 /* 4 MByte */ #define OCTEON_REVISION 0x1fc00010 #define OCTEON_REV_FPGRV 0xff0000 /* CBUS FPGA revision */ #define OCTEON_REV_CORID 0x00fc00 /* Core Board ID */ #define OCTEON_REV_CORRV 0x000300 /* Core Board Revision */ #define OCTEON_REV_PROID 0x0000f0 /* Product ID */ #define OCTEON_REV_PRORV 0x00000f /* Product Revision */ /* PCI definitions */ #define OCTEON_UART0ADR 0x8001180000000800ull #define OCTEON_UART1ADR 0x8001180000000C00ull #define OCTEON_UART_SIZE 0x400 #define OCTEON_MIO_BOOT_BIST_STAT 0x80011800000000F8ull /************************** * To Delete */ #define OCTEON_SOUTHBRIDGE_INTR 0 #define OCTEON_PCI0_IO_BASE OCTEON_PCIMEM3_BASE #define OCTEON_PCI0_ADDR( addr ) (OCTEON_PCI0_IO_BASE + (addr)) #define OCTEON_RTCADR 0x70 // OCTEON_PCI_IO_ADDR8(0x70) #define OCTEON_RTCDAT 0x71 // OCTEON_PCI_IO_ADDR8(0x71) #define OCTEON_SMSC_COM1_ADR 0x3f8 #define OCTEON_SMSC_COM2_ADR 0x2f8 #define OCTEON_UARTT0ADR OCTEON_PCI0_ADDR(OCTEON_SMSC_COM1_ADR) #define OCTEON_UARTT1ADR OCTEON_SMSC_COM2_ADR // OCTEON_PCI0_ADDR(OCTEON_SMSC_COM2_ADR) #define OCTEON_SMSC_1284_ADR 0x378 #define OCTEON_1284ADR OCTEON_SMSC_1284_ADR // OCTEON_PCI0_ADDR(OCTEON_SMSC_1284_ADR) #define OCTEON_SMSC_FDD_ADR 0x3f0 #define OCTEON_FDDADR OCTEON_SMSC_FDD_ADR // OCTEON_PCI0_ADDR(OCTEON_SMSC_FDD_ADR) #define OCTEON_SMSC_KYBD_ADR 0x60 /* Fixed 0x60, 0x64 */ #define OCTEON_KYBDADR OCTEON_SMSC_KYBD_ADR // OCTEON_PCI0_ADDR(OCTEON_SMSC_KYBD_ADR) #define OCTEON_SMSC_MOUSE_ADR OCTEON_SMSC_KYBD_ADR #define OCTEON_MOUSEADR OCTEON_KYBDADR #define OCTEON_DMA_PCI_PCIBASE 0x00000000UL #define OCTEON_DMA_PCI_PHYSBASE 0x00000000UL #define OCTEON_DMA_PCI_SIZE (256 * 1024 * 1024) #define OCTEON_DMA_ISA_PCIBASE 0x00800000UL #define OCTEON_DMA_ISA_PHYSBASE 0x00000000UL #define OCTEON_DMA_ISA_SIZE (8 * 1024 * 1024) #ifndef _LOCORE void led_bar(uint8_t); void led_display_word(uint32_t); void led_display_str(const char *); void led_display_char(int, uint8_t); #endif