/*-
 * Copyright (c) 2012 Damjan Marion <dmarion@Freebsd.org>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 * 
 * $FreeBSD$
 */

/ {
	compatible = "ti,am335x";
	#address-cells = <1>;
	#size-cells = <1>;

	interrupt-parent = <&AINTC>;

	SOC: am335x {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "simple-bus";
		ranges;
		bus-frequency = <0>;

		AINTC: interrupt-controller@48200000 {
			compatible = "ti,aintc";
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <1>;
			reg =	< 0x48200000 0x1000 >;
		};

		scm@44e10000 {
			compatible = "ti,scm";
			reg =	< 0x44e10000 0x2000 >;
		};

		prcm@44E00000 {
			compatible = "am335x,prcm";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = < 0x44E00000 0x1300 >;
		};

		dmtimers@44E05000 {
			compatible = "ti,am335x-dmtimer";
			#address-cells = <1>;
			#size-cells = <1>;
			reg =	< 0x44E05000 0x1000
				  0x44E31000 0x1000
				  0x48040000 0x1000
				  0x48042000 0x1000
				  0x48044000 0x1000
				  0x48046000 0x1000
				  0x48048000 0x1000
				  0x4804A000 0x1000 >;
			interrupts = < 66 67 68 69 92 93 94 95 >;
			interrupt-parent = <&AINTC>;
		};

		GPIO: gpio {
			#gpio-cells = <3>;
			compatible = "ti,gpio";
			gpio-controller;
			reg =<	0x44E07000 0x1000
				0x4804C000 0x1000
				0x481AC000 0x1000
				0x481AE000 0x1000 >;
			interrupts = < 96 97 98 99 32 33 62 63 >;
			interrupt-parent = <&AINTC>;
		};

		uart0: serial@44E09000 {
			compatible = "ns16550";
			reg = <0x44E09000 0x1000>;
			reg-shift = <2>;
			interrupts = < 72 >;
			interrupt-parent = <&AINTC>;
			clock-frequency = < 48000000 >; /* FIXME */
		};

		edma3@49000000 {
			compatible = "ti,edma3";
			reg =<	0x49000000 0x100000	/* Channel Controller Regs */
				0x49800000 0x100000	/* Transfer Controller 0 Regs */
				0x49900000 0x100000	/* Transfer Controller 1 Regs */
				0x49a00000 0x100000 >;	/* Transfer Controller 2 Regs */
			interrupts = <12 13 14>;
			interrupt-parent = <&AINTC>;
		};

		mmchs0@4809C000 {
			compatible = "ti,mmchs";
			reg =<0x48060000 0x1000 >;
			interrupts = <64>;
			interrupt-parent = <&AINTC>;
			mmchs-device-id = <0>;
		};

		enet0: ethernet@4A100000 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "ti,cpsw";
			reg = <0x4A100000 0x4000>;
			interrupts = <40 41 42 43>;
			interrupt-parent = <&AINTC>;
			phy-handle = <&phy0>;
			mdio@0 {
				#address-cells = <1>;
				#size-cells = <0>;
				compatible = "ti,cpsw-mdio";
				phy0: ethernet-phy@0 {
					reg = <0x0>;
				};
			};
		};

		i2c0: i2c@44e0b000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "ti,i2c";
			reg =<	0x44e0b000 0x1000 >;
			interrupts = <70>;
			interrupt-parent = <&AINTC>;
			i2c-device-id = <0>;
		};
	};
};