/* $NetBSD: asm.h,v 1.29 2000/12/14 21:29:51 jeffs Exp $ */ /* * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Ralph Campbell. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)machAsmDefs.h 8.1 (Berkeley) 6/10/93 * JNPR: asm.h,v 1.10 2007/08/09 11:23:32 katta * $FreeBSD$ */ /* * machAsmDefs.h -- * * Macros used when writing assembler programs. * * Copyright (C) 1989 Digital Equipment Corporation. * Permission to use, copy, modify, and distribute this software and * its documentation for any purpose and without fee is hereby granted, * provided that the above copyright notice appears in all copies. * Digital Equipment Corporation makes no representations about the * suitability of this software for any purpose. It is provided "as is" * without express or implied warranty. * * from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machAsmDefs.h, * v 1.2 89/08/15 18:28:24 rab Exp SPRITE (DECWRL) */ #ifndef _MACHINE_ASM_H_ #define _MACHINE_ASM_H_ #ifndef NO_REG_DEFS #include #endif #include #include #undef __FBSDID #if !defined(lint) && !defined(STRIP_FBSDID) #define __FBSDID(s) .ident s #else #define __FBSDID(s) /* nothing */ #endif /* * Define -pg profile entry code. * Must always be noreorder, must never use a macro instruction * Final addiu to t9 must always equal the size of this _KERN_MCOUNT */ #define _KERN_MCOUNT \ .set push; \ .set noreorder; \ .set noat; \ subu sp,sp,16; \ sw t9,12(sp); \ move AT,ra; \ lui t9,%hi(_mcount); \ addiu t9,t9,%lo(_mcount); \ jalr t9; \ nop; \ lw t9,4(sp); \ addiu sp,sp,8; \ addiu t9,t9,40; \ .set pop; #ifdef GPROF #define MCOUNT _KERN_MCOUNT #else #define MCOUNT #endif #define _C_LABEL(x) x #ifdef USE_AENT #define AENT(x) \ .aent x, 0 #else #define AENT(x) #endif /* * WARN_REFERENCES: create a warning if the specified symbol is referenced */ #define WARN_REFERENCES(_sym,_msg) \ .section .gnu.warning. ## _sym ; .ascii _msg ; .text /* * These are temp registers whose names can be used in either the old * or new ABI, although they map to different physical registers. In * the old ABI, they map to t4-t7, and in the new ABI, they map to a4-a7. * * Because they overlap with the last 4 arg regs in the new ABI, ta0-ta3 * should be used only when we need more than t0-t3. */ #if defined(__mips_n32) || defined(__mips_n64) #define ta0 $8 #define ta1 $9 #define ta2 $10 #define ta3 $11 #else #define ta0 $12 #define ta1 $13 #define ta2 $14 #define ta3 $15 #endif /* __mips_n32 || __mips_n64 */ #ifdef __ELF__ # define _C_LABEL(x) x #else # define _C_LABEL(x) _ ## x #endif /* * WEAK_ALIAS: create a weak alias. */ #define WEAK_ALIAS(alias,sym) \ .weak alias; \ alias = sym /* * STRONG_ALIAS: create a strong alias. */ #define STRONG_ALIAS(alias,sym) \ .globl alias; \ alias = sym #define GLOBAL(sym) \ .globl sym; sym: #define ENTRY(sym) \ .text; .globl sym; .ent sym; sym: #define ASM_ENTRY(sym) \ .text; .globl sym; .type sym,@function; sym: /* * LEAF * A leaf routine does * - call no other function, * - never use any register that callee-saved (S0-S8), and * - not use any local stack storage. */ #define LEAF(x) \ .globl _C_LABEL(x); \ .ent _C_LABEL(x), 0; \ _C_LABEL(x): ; \ .frame sp, 0, ra; \ MCOUNT /* * LEAF_NOPROFILE * No profilable leaf routine. */ #define LEAF_NOPROFILE(x) \ .globl _C_LABEL(x); \ .ent _C_LABEL(x), 0; \ _C_LABEL(x): ; \ .frame sp, 0, ra /* * XLEAF * declare alternate entry to leaf routine */ #define XLEAF(x) \ .globl _C_LABEL(x); \ AENT (_C_LABEL(x)); \ _C_LABEL(x): /* * NESTED * A function calls other functions and needs * therefore stack space to save/restore registers. */ #define NESTED(x, fsize, retpc) \ .globl _C_LABEL(x); \ .ent _C_LABEL(x), 0; \ _C_LABEL(x): ; \ .frame sp, fsize, retpc; \ MCOUNT /* * NESTED_NOPROFILE(x) * No profilable nested routine. */ #define NESTED_NOPROFILE(x, fsize, retpc) \ .globl _C_LABEL(x); \ .ent _C_LABEL(x), 0; \ _C_LABEL(x): ; \ .frame sp, fsize, retpc /* * XNESTED * declare alternate entry point to nested routine. */ #define XNESTED(x) \ .globl _C_LABEL(x); \ AENT (_C_LABEL(x)); \ _C_LABEL(x): /* * END * Mark end of a procedure. */ #define END(x) \ .end _C_LABEL(x) /* * IMPORT -- import external symbol */ #define IMPORT(sym, size) \ .extern _C_LABEL(sym),size /* * EXPORT -- export definition of symbol */ #define EXPORT(x) \ .globl _C_LABEL(x); \ _C_LABEL(x): /* * VECTOR * exception vector entrypoint * XXX: regmask should be used to generate .mask */ #define VECTOR(x, regmask) \ .ent _C_LABEL(x),0; \ EXPORT(x); \ #define VECTOR_END(x) \ EXPORT(x ## End); \ END(x) /* * Macros to panic and printf from assembly language. */ #define PANIC(msg) \ PTR_LA a0, 9f; \ jal _C_LABEL(panic); \ nop; \ MSG(msg) #define PANIC_KSEG0(msg, reg) PANIC(msg) #define PRINTF(msg) \ PTR_LA a0, 9f; \ jal _C_LABEL(printf); \ nop; \ MSG(msg) #define MSG(msg) \ .rdata; \ 9: .asciiz msg; \ .text #define ASMSTR(str) \ .asciiz str; \ .align 3 /* * Call ast if required * * XXX Do we really need to disable interrupts? */ #define DO_AST \ 44: \ mfc0 t0, MIPS_COP_0_STATUS ;\ and a0, t0, MIPS_SR_INT_IE ;\ xor t0, a0, t0 ;\ mtc0 t0, MIPS_COP_0_STATUS ;\ COP0_SYNC ;\ GET_CPU_PCPU(s1) ;\ PTR_L s3, PC_CURPCB(s1) ;\ PTR_L s1, PC_CURTHREAD(s1) ;\ lw s2, TD_FLAGS(s1) ;\ li s0, TDF_ASTPENDING | TDF_NEEDRESCHED;\ and s2, s0 ;\ mfc0 t0, MIPS_COP_0_STATUS ;\ or t0, a0, t0 ;\ mtc0 t0, MIPS_COP_0_STATUS ;\ COP0_SYNC ;\ beq s2, zero, 4f ;\ nop ;\ PTR_LA s0, _C_LABEL(ast) ;\ jalr s0 ;\ PTR_ADDU a0, s3, U_PCB_REGS ;\ j 44b ;\ nop ;\ 4: /* * XXX retain dialects XXX */ #define ALEAF(x) XLEAF(x) #define NLEAF(x) LEAF_NOPROFILE(x) #define NON_LEAF(x, fsize, retpc) NESTED(x, fsize, retpc) #define NNON_LEAF(x, fsize, retpc) NESTED_NOPROFILE(x, fsize, retpc) #if defined(__mips_o32) #define SZREG 4 #else #define SZREG 8 #endif #if defined(__mips_o32) || defined(__mips_o64) #define ALSK 7 /* stack alignment */ #define ALMASK -7 /* stack alignment */ #define SZFPREG 4 #define FP_L lwc1 #define FP_S swc1 #else #define ALSK 15 /* stack alignment */ #define ALMASK -15 /* stack alignment */ #define SZFPREG 8 #define FP_L ldc1 #define FP_S sdc1 #endif /* * standard callframe { * register_t cf_pad[N]; o32/64 (N=0), n32 (N=1) n64 (N=1) * register_t cf_args[4]; arg0 - arg3 (only on o32 and o64) * register_t cf_gp; global pointer (only on n32 and n64) * register_t cf_sp; frame pointer * register_t cf_ra; return address * }; */ #if defined(__mips_o32) || defined(__mips_o64) #define CALLFRAME_SIZ (SZREG * (4 + 2)) #define CALLFRAME_S0 0 #elif defined(__mips_n32) || defined(__mips_n64) #define CALLFRAME_SIZ (SZREG * 4) #define CALLFRAME_S0 (CALLFRAME_SIZ - 4 * SZREG) #endif #ifndef _KERNEL #define CALLFRAME_GP (CALLFRAME_SIZ - 3 * SZREG) #endif #define CALLFRAME_SP (CALLFRAME_SIZ - 2 * SZREG) #define CALLFRAME_RA (CALLFRAME_SIZ - 1 * SZREG) /* * Endian-independent assembly-code aliases for unaligned memory accesses. */ #if _BYTE_ORDER == _LITTLE_ENDIAN # define LWHI lwr # define LWLO lwl # define SWHI swr # define SWLO swl # if SZREG == 4 # define REG_LHI lwr # define REG_LLO lwl # define REG_SHI swr # define REG_SLO swl # else # define REG_LHI ldr # define REG_LLO ldl # define REG_SHI sdr # define REG_SLO sdl # endif #endif #if _BYTE_ORDER == _BIG_ENDIAN # define LWHI lwl # define LWLO lwr # define SWHI swl # define SWLO swr # if SZREG == 4 # define REG_LHI lwl # define REG_LLO lwr # define REG_SHI swl # define REG_SLO swr # else # define REG_LHI ldl # define REG_LLO ldr # define REG_SHI sdl # define REG_SLO sdr # endif #endif /* * While it would be nice to be compatible with the SGI * REG_L and REG_S macros, because they do not take parameters, it * is impossible to use them with the _MIPS_SIM_ABIX32 model. * * These macros hide the use of mips3 instructions from the * assembler to prevent the assembler from generating 64-bit style * ABI calls. */ #if _MIPS_SZPTR == 32 #define PTR_ADD add #define PTR_ADDI addi #define PTR_ADDU addu #define PTR_ADDIU addiu #define PTR_SUB add #define PTR_SUBI subi #define PTR_SUBU subu #define PTR_SUBIU subu #define PTR_L lw #define PTR_LA la #define PTR_LI li #define PTR_S sw #define PTR_SLL sll #define PTR_SLLV sllv #define PTR_SRL srl #define PTR_SRLV srlv #define PTR_SRA sra #define PTR_SRAV srav #define PTR_LL ll #define PTR_SC sc #define PTR_WORD .word #define PTR_SCALESHIFT 2 #else /* _MIPS_SZPTR == 64 */ #define PTR_ADD dadd #define PTR_ADDI daddi #define PTR_ADDU daddu #define PTR_ADDIU daddiu #define PTR_SUB dadd #define PTR_SUBI dsubi #define PTR_SUBU dsubu #define PTR_SUBIU dsubu #define PTR_L ld #define PTR_LA dla #define PTR_LI dli #define PTR_S sd #define PTR_SLL dsll #define PTR_SLLV dsllv #define PTR_SRL dsrl #define PTR_SRLV dsrlv #define PTR_SRA dsra #define PTR_SRAV dsrav #define PTR_LL lld #define PTR_SC scd #define PTR_WORD .dword #define PTR_SCALESHIFT 3 #endif /* _MIPS_SZPTR == 64 */ #if _MIPS_SZINT == 32 #define INT_ADD add #define INT_ADDI addi #define INT_ADDU addu #define INT_ADDIU addiu #define INT_SUB add #define INT_SUBI subi #define INT_SUBU subu #define INT_SUBIU subu #define INT_L lw #define INT_LA la #define INT_S sw #define INT_SLL sll #define INT_SLLV sllv #define INT_SRL srl #define INT_SRLV srlv #define INT_SRA sra #define INT_SRAV srav #define INT_LL ll #define INT_SC sc #define INT_WORD .word #define INT_SCALESHIFT 2 #else #define INT_ADD dadd #define INT_ADDI daddi #define INT_ADDU daddu #define INT_ADDIU daddiu #define INT_SUB dadd #define INT_SUBI dsubi #define INT_SUBU dsubu #define INT_SUBIU dsubu #define INT_L ld #define INT_LA dla #define INT_S sd #define INT_SLL dsll #define INT_SLLV dsllv #define INT_SRL dsrl #define INT_SRLV dsrlv #define INT_SRA dsra #define INT_SRAV dsrav #define INT_LL lld #define INT_SC scd #define INT_WORD .dword #define INT_SCALESHIFT 3 #endif #if _MIPS_SZLONG == 32 #define LONG_ADD add #define LONG_ADDI addi #define LONG_ADDU addu #define LONG_ADDIU addiu #define LONG_SUB add #define LONG_SUBI subi #define LONG_SUBU subu #define LONG_SUBIU subu #define LONG_L lw #define LONG_LA la #define LONG_S sw #define LONG_SLL sll #define LONG_SLLV sllv #define LONG_SRL srl #define LONG_SRLV srlv #define LONG_SRA sra #define LONG_SRAV srav #define LONG_LL ll #define LONG_SC sc #define LONG_WORD .word #define LONG_SCALESHIFT 2 #else #define LONG_ADD dadd #define LONG_ADDI daddi #define LONG_ADDU daddu #define LONG_ADDIU daddiu #define LONG_SUB dadd #define LONG_SUBI dsubi #define LONG_SUBU dsubu #define LONG_SUBIU dsubu #define LONG_L ld #define LONG_LA dla #define LONG_S sd #define LONG_SLL dsll #define LONG_SLLV dsllv #define LONG_SRL dsrl #define LONG_SRLV dsrlv #define LONG_SRA dsra #define LONG_SRAV dsrav #define LONG_LL lld #define LONG_SC scd #define LONG_WORD .dword #define LONG_SCALESHIFT 3 #endif #if SZREG == 4 #define REG_L lw #define REG_S sw #define REG_LI li #define REG_ADDU addu #define REG_SLL sll #define REG_SLLV sllv #define REG_SRL srl #define REG_SRLV srlv #define REG_SRA sra #define REG_SRAV srav #define REG_LL ll #define REG_SC sc #define REG_SCALESHIFT 2 #else #define REG_L ld #define REG_S sd #define REG_LI dli #define REG_ADDU daddu #define REG_SLL dsll #define REG_SLLV dsllv #define REG_SRL dsrl #define REG_SRLV dsrlv #define REG_SRA dsra #define REG_SRAV dsrav #define REG_LL lld #define REG_SC scd #define REG_SCALESHIFT 3 #endif #if _MIPS_ISA == _MIPS_ISA_MIPS1 || _MIPS_ISA == _MIPS_ISA_MIPS2 || \ _MIPS_ISA == _MIPS_ISA_MIPS32 #define MFC0 mfc0 #define MTC0 mtc0 #endif #if _MIPS_ISA == _MIPS_ISA_MIPS3 || _MIPS_ISA == _MIPS_ISA_MIPS4 || \ _MIPS_ISA == _MIPS_ISA_MIPS64 #define MFC0 dmfc0 #define MTC0 dmtc0 #endif #if defined(__mips_o32) || defined(__mips_o64) #ifdef __ABICALLS__ #define CPRESTORE(r) .cprestore r #define CPLOAD(r) .cpload r #else #define CPRESTORE(r) /* not needed */ #define CPLOAD(r) /* not needed */ #endif #define SETUP_GP \ .set push; \ .set noreorder; \ .cpload t9; \ .set pop #define SETUP_GPX(r) \ .set push; \ .set noreorder; \ move r,ra; /* save old ra */ \ bal 7f; \ nop; \ 7: .cpload ra; \ move ra,r; \ .set pop #define SETUP_GPX_L(r,lbl) \ .set push; \ .set noreorder; \ move r,ra; /* save old ra */ \ bal lbl; \ nop; \ lbl: .cpload ra; \ move ra,r; \ .set pop #define SAVE_GP(x) .cprestore x #define SETUP_GP64(a,b) /* n32/n64 specific */ #define SETUP_GP64_R(a,b) /* n32/n64 specific */ #define SETUP_GPX64(a,b) /* n32/n64 specific */ #define SETUP_GPX64_L(a,b,c) /* n32/n64 specific */ #define RESTORE_GP64 /* n32/n64 specific */ #define USE_ALT_CP(a) /* n32/n64 specific */ #endif /* __mips_o32 || __mips_o64 */ #if defined(__mips_o32) || defined(__mips_o64) #define REG_PROLOGUE .set push #define REG_EPILOGUE .set pop #endif #if defined(__mips_n32) || defined(__mips_n64) #define REG_PROLOGUE .set push ; .set mips3 #define REG_EPILOGUE .set pop #endif #if defined(__mips_n32) || defined(__mips_n64) #define SETUP_GP /* o32 specific */ #define SETUP_GPX(r) /* o32 specific */ #define SETUP_GPX_L(r,lbl) /* o32 specific */ #define SAVE_GP(x) /* o32 specific */ #define SETUP_GP64(a,b) .cpsetup $25, a, b #define SETUP_GPX64(a,b) \ .set push; \ move b,ra; \ .set noreorder; \ bal 7f; \ nop; \ 7: .set pop; \ .cpsetup ra, a, 7b; \ move ra,b #define SETUP_GPX64_L(a,b,c) \ .set push; \ move b,ra; \ .set noreorder; \ bal c; \ nop; \ c: .set pop; \ .cpsetup ra, a, c; \ move ra,b #define RESTORE_GP64 .cpreturn #define USE_ALT_CP(a) .cplocal a #endif /* __mips_n32 || __mips_n64 */ #define mfc0_macro(data, spr) \ __asm __volatile ("mfc0 %0, $%1" \ : "=r" (data) /* outputs */ \ : "i" (spr)); /* inputs */ #define mtc0_macro(data, spr) \ __asm __volatile ("mtc0 %0, $%1" \ : /* outputs */ \ : "r" (data), "i" (spr)); /* inputs */ #define cfc0_macro(data, spr) \ __asm __volatile ("cfc0 %0, $%1" \ : "=r" (data) /* outputs */ \ : "i" (spr)); /* inputs */ #define ctc0_macro(data, spr) \ __asm __volatile ("ctc0 %0, $%1" \ : /* outputs */ \ : "r" (data), "i" (spr)); /* inputs */ #define lbu_macro(data, addr) \ __asm __volatile ("lbu %0, 0x0(%1)" \ : "=r" (data) /* outputs */ \ : "r" (addr)); /* inputs */ #define lb_macro(data, addr) \ __asm __volatile ("lb %0, 0x0(%1)" \ : "=r" (data) /* outputs */ \ : "r" (addr)); /* inputs */ #define lwl_macro(data, addr) \ __asm __volatile ("lwl %0, 0x0(%1)" \ : "=r" (data) /* outputs */ \ : "r" (addr)); /* inputs */ #define lwr_macro(data, addr) \ __asm __volatile ("lwr %0, 0x0(%1)" \ : "=r" (data) /* outputs */ \ : "r" (addr)); /* inputs */ #define ldl_macro(data, addr) \ __asm __volatile ("ldl %0, 0x0(%1)" \ : "=r" (data) /* outputs */ \ : "r" (addr)); /* inputs */ #define ldr_macro(data, addr) \ __asm __volatile ("ldr %0, 0x0(%1)" \ : "=r" (data) /* outputs */ \ : "r" (addr)); /* inputs */ #define sb_macro(data, addr) \ __asm __volatile ("sb %0, 0x0(%1)" \ : /* outputs */ \ : "r" (data), "r" (addr)); /* inputs */ #define swl_macro(data, addr) \ __asm __volatile ("swl %0, 0x0(%1)" \ : /* outputs */ \ : "r" (data), "r" (addr)); /* inputs */ #define swr_macro(data, addr) \ __asm __volatile ("swr %0, 0x0(%1)" \ : /* outputs */ \ : "r" (data), "r" (addr)); /* inputs */ #define sdl_macro(data, addr) \ __asm __volatile ("sdl %0, 0x0(%1)" \ : /* outputs */ \ : "r" (data), "r" (addr)); /* inputs */ #define sdr_macro(data, addr) \ __asm __volatile ("sdr %0, 0x0(%1)" \ : /* outputs */ \ : "r" (data), "r" (addr)); /* inputs */ #define mfgr_macro(data, gr) \ __asm __volatile ("move %0, $%1" \ : "=r" (data) /* outputs */ \ : "i" (gr)); /* inputs */ #define dmfc0_macro(data, spr) \ __asm __volatile ("dmfc0 %0, $%1" \ : "=r" (data) /* outputs */ \ : "i" (spr)); /* inputs */ #define dmtc0_macro(data, spr, sel) \ __asm __volatile ("dmtc0 %0, $%1, %2" \ : /* no outputs */ \ : "r" (data), "i" (spr), "i" (sel)); /* inputs */ #define GET_CPU_PCPU(reg) \ PTR_L reg, _C_LABEL(pcpup); /* * Description of the setjmp buffer * * word 0 magic number (dependant on creator) * 1 RA * 2 S0 * 3 S1 * 4 S2 * 5 S3 * 6 S4 * 7 S5 * 8 S6 * 9 S7 * 10 SP * 11 S8 * 12 GP (dependent on ABI) * 13 signal mask (dependant on magic) * 14 (con't) * 15 (con't) * 16 (con't) * * The magic number number identifies the jmp_buf and * how the buffer was created as well as providing * a sanity check * */ #define _JB_MAGIC__SETJMP 0xBADFACED #define _JB_MAGIC_SETJMP 0xFACEDBAD /* Valid for all jmp_buf's */ #define _JB_MAGIC 0 #define _JB_REG_RA 1 #define _JB_REG_S0 2 #define _JB_REG_S1 3 #define _JB_REG_S2 4 #define _JB_REG_S3 5 #define _JB_REG_S4 6 #define _JB_REG_S5 7 #define _JB_REG_S6 8 #define _JB_REG_S7 9 #define _JB_REG_SP 10 #define _JB_REG_S8 11 #if defined(__mips_n32) || defined(__mips_n64) #define _JB_REG_GP 12 #endif /* Only valid with the _JB_MAGIC_SETJMP magic */ #define _JB_SIGMASK 13 /* * Various macros for dealing with TLB hazards * (a) why so many? * (b) when to use? * (c) why not used everywhere? */ /* * Assume that w alaways need nops to escape CP0 hazard * TODO: Make hazard delays configurable. Stuck with 5 cycles on the moment * For more info on CP0 hazards see Chapter 7 (p.99) of "MIPS32 Architecture * For Programmers Volume III: The MIPS32 Privileged Resource Architecture" */ #if defined(CPU_NLM) #define HAZARD_DELAY sll $0,3 #define ITLBNOPFIX sll $0,3 #elif defined(CPU_RMI) #define HAZARD_DELAY #define ITLBNOPFIX #else #define ITLBNOPFIX nop;nop;nop;nop;nop;nop;nop;nop;nop;nop; #define HAZARD_DELAY nop;nop;nop;nop;nop; #endif #endif /* !_MACHINE_ASM_H_ */