NM_DEVICE_WIMAX_HW_ADDRESS

#define NM_DEVICE_WIMAX_HW_ADDRESS       "hw-address"

NM_DEVICE_WIMAX_ACTIVE_NSP

#define NM_DEVICE_WIMAX_ACTIVE_NSP       "active-nsp"

NM_DEVICE_WIMAX_CENTER_FREQUENCY

#define NM_DEVICE_WIMAX_CENTER_FREQUENCY "center-frequency"

NM_DEVICE_WIMAX_RSSI

#define NM_DEVICE_WIMAX_RSSI             "rssi"

NM_DEVICE_WIMAX_CINR

#define NM_DEVICE_WIMAX_CINR             "cinr"

NM_DEVICE_WIMAX_TX_POWER

#define NM_DEVICE_WIMAX_TX_POWER         "tx-power"

NM_DEVICE_WIMAX_BSID

#define NM_DEVICE_WIMAX_BSID             "bsid"

NMDeviceWimax

typedef struct _NMDeviceWimax NMDeviceWimax;

NMDeviceWimaxClass

typedef struct {
	NMDeviceClass parent;

	/* Signals */
	void (*nsp_added)   (NMDeviceWimax *self, NMWimaxNsp *nsp);
	void (*nsp_removed) (NMDeviceWimax *self, NMWimaxNsp *nsp);
} NMDeviceWimaxClass;

nm_device_wimax_new ()

GObject *           nm_device_wimax_new                 (DBusGConnection *connection,
                                                         const char *path);

Creates a new NMDeviceWimax.

nm_device_wimax_get_hw_address ()

const char *        nm_device_wimax_get_hw_address      (NMDeviceWimax *wimax);

Gets the hardware (MAC) address of the NMDeviceWimax

nm_device_wimax_get_active_nsp ()

NMWimaxNsp *        nm_device_wimax_get_active_nsp      (NMDeviceWimax *wimax);

Gets the active NMWimaxNsp.

nm_device_wimax_get_nsp_by_path ()

NMWimaxNsp *        nm_device_wimax_get_nsp_by_path     (NMDeviceWimax *wimax,
                                                         const char *path);

Gets a NMWimaxNsp by path.

nm_device_wimax_get_nsps ()

const GPtrArray *   nm_device_wimax_get_nsps            (NMDeviceWimax *wimax);

Gets all the scanned NSPs of the NMDeviceWimax.

nm_device_wimax_get_center_frequency ()

guint               nm_device_wimax_get_center_frequency
                                                        (NMDeviceWimax *self);

Gets the center frequency (in KHz) of the radio channel the device is using to communicate with the network when connected. Has no meaning when the device is not connected.

nm_device_wimax_get_rssi ()

gint                nm_device_wimax_get_rssi            (NMDeviceWimax *self);

Gets the RSSI of the current radio link in dBm. This value indicates how strong the raw received RF signal from the base station is, but does not indicate the overall quality of the radio link. Has no meaning when the device is not connected.

nm_device_wimax_get_cinr ()

gint                nm_device_wimax_get_cinr            (NMDeviceWimax *self);

Gets the CINR (Carrier to Interference + Noise Ratio) of the current radio link in dB. CINR is a more accurate measure of radio link quality. Has no meaning when the device is not connected.

nm_device_wimax_get_tx_power ()

gint                nm_device_wimax_get_tx_power        (NMDeviceWimax *self);

Average power of the last burst transmitted by the device, in units of 0.5 dBm. i.e. a TxPower of -11 represents an actual device TX power of -5.5 dBm. Has no meaning when the device is not connected.

nm_device_wimax_get_bsid ()

const char *        nm_device_wimax_get_bsid            (NMDeviceWimax *self);

Gets the ID of the serving Base Station when the device is connected.

The "active-nsp" property

  "active-nsp"               NMWimaxNsp*           : Read

The active NMWimaxNsp of the device.

The "bsid" property

  "bsid"                     gchar*                : Read

The ID of the serving base station as received from the network. Has no meaning when the device is not connected.

Default value: NULL

The "center-frequency" property

  "center-frequency"         guint                 : Read

The center frequency (in KHz) of the radio channel the device is using to communicate with the network when connected. Has no meaning when the device is not connected.

Default value: 0

The "cinr" property

  "cinr"                     gint                  : Read

CINR (Carrier to Interference + Noise Ratio) of the current radio link in dB. CINR is a more accurate measure of radio link quality. Has no meaning when the device is not connected.

Default value: 0

The "hw-address" property

  "hw-address"               gchar*                : Read

The hardware (MAC) address of the device.

Default value: NULL

The "rssi" property

  "rssi"                     gint                  : Read

RSSI of the current radio link in dBm. This value indicates how strong the raw received RF signal from the base station is, but does not indicate the overall quality of the radio link. Has no meaning when the device is not connected.

Default value: 0

The "tx-power" property

  "tx-power"                 gint                  : Read

Average power of the last burst transmitted by the device, in units of 0.5 dBm. i.e. a TxPower of -11 represents an actual device TX power of -5.5 dBm. Has no meaning when the device is not connected.

Default value: 0

The "nsp-added" signal

void                user_function                      (NMDeviceWimax *self,
                                                        GObject       *nsp,
                                                        gpointer       user_data)      : Run First

Notifies that a NMWimaxNsp is added to the wimax device.

The "nsp-removed" signal

void                user_function                      (NMDeviceWimax *self,
                                                        GObject       *nsp,
                                                        gpointer       user_data)      : Run First

Notifies that a NMWimaxNsp is removed from the wimax device.